Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green circuit board with two black SATA ports and gold PCIe connector

LORDWORLD

LORDWORLD PCIe to 2-Channel SATA HAT+ for Raspberry Pi 5 development board

SKU CH-6Y9Z-KVM93

Adds two SATA 3.0 ports to Raspberry Pi 5 via 16-pin PCIe for NAS or backup builds

  • Fast 6 Gbps storage via dual SATA 3.0 ports
  • Works instantly on Raspberry Pi 5 with no drivers needed
  • Two LEDs per port show drive activity at a glance
  • Onboard EEPROM enables automatic HAT+ recognition on boot
  • Compact two-channel design fits DIY NAS and backup builds

SATA 3.0 HAT+ for Raspberry Pi 5

This LORDWORLD HAT+ adds two SATA 3.0 ports to a Raspberry Pi 5 through its 16-pin PCIe interface. The board operates at 6Gbps and requires no driver installation. An onboard EEPROM stores HAT+ identification data for automatic recognition during boot. Two LEDs per port show drive activity at a glance.

Makers building compact NAS or backup servers

The dual-port design suits builders who want redundant or high-capacity storage on a single Pi 5. Projects needing more than two drives cannot use this board. Systems requiring a different storage interface are not supported by this hardware.

Two SATA 3.0 ports via 16-pin PCIe

The single specification that decides fit is the dual-channel SATA 3.0 connection over the Pi 5 PCIe bus. If your project needs exactly two SATA drives and driver-free operation, this HAT+ matches the requirement. Any other port count or interface means this is not the correct part.

I korthet

  • Fast 6 Gbps storage via dual SATA 3.0 ports
  • Works instantly on Raspberry Pi 5 with no drivers needed
  • Two LEDs per port show drive activity at a glance
  • Onboard EEPROM enables automatic HAT+ recognition on boot
  • Compact two-channel design fits DIY NAS and backup builds

Specifikationer

BrandLORDWORLD

Frågor om den här produkten

Will the 16-pin PCIe interface on this HAT+ work with my Raspberry Pi 5 without blocking other HATs?

The board connects through the Pi 5's 16-pin PCIe socket and follows the HAT+ mechanical profile, so it sits flush and leaves the GPIO header free for additional HATs.

How can I confirm the two SATA 3.0 ports are active after I boot the Pi 5?

Each port has a dedicated status LED that lights when a drive is detected and blinks during read or write activity, giving immediate visual confirmation.

Does the package include SATA data cables, power cables or drives, or must I source them separately?

Only the HAT+ board itself is supplied; SATA data cables, drive power cables and the HDDs or SSDs must be purchased separately.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.