Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

LUOM

LUOM L06B2IN1 2in1 USB-C/USB 3.0 to SATA III 2.5" hard drive adapter cable

SKU CH-PZF5-TRYVF

Connects 2.5″ SATA SSD or HDD to USB-C or USB 3.0 ports for data transfer, backup, and drive recovery at up to 5 Gbps, with UASP support for faster speeds on compatible systems

  • Changer TypeUSB to SATA
  • SpecificationsSupports Standard Notebook 2.5" SATA and SATA II Hard drives
  • FeaturesQuick Access to SATA SSD/HDD: USB to SATA 3.0/usb-c adapter
  • Package Contents2in1 USB-C/USB 3.0 to SSD/2.5" SATA Adapter Cable X 1
  • Connect 2.5" SATA drives via USB-C or USB 3.0
  • Transfer up to 5 Gbps on USB 3.0, 480 Mbps on USB 2.0
  • UASP support boosts read speeds 70% and write speeds 40% on compatible systems
  • Works with Windows 11/10/8/7, macOS 10.8+, Linux, Chrome OS and Android
  • Hot-swappable plug-and-play for quick data recovery, backup or storage expansion

Dual-interface SATA adapter

This LUOM L06B2IN1 cable connects a standard 2.5" SATA SSD or HDD to a host device through either a USB-C or USB 3.0 Type-A plug. It supports SATA I, II and III drives and is powered entirely from the USB port. The adapter is intended for quick data access, backup, system upgrades or file recovery from a bare drive.

Suits drive-recovery and portable-storage tasks

It works with Windows 11 down to XP, macOS, Linux, ChromeOS and Android on laptops, tablets, desktops, routers or smart TVs that have a USB-A or USB-C port. Hot-swap and plug-and-play operation means no driver installation is required. Builders who need 3.5" drive support or an external power supply for larger disks should look at a different solution because this cable only fits standard 2.5" drives and draws power from the host port.

UASP-accelerated USB 3.0 speeds

When the host controller supports UASP, the adapter can reach 6 Gbps, delivering 70% faster reads and 40% faster writes than conventional USB 3.0. Without UASP it runs at the standard 5 Gbps USB 3.0 rate and falls back to 480 Mbps on USB 2.0 or 1.1 ports.

I korthet

  • Connect 2.5" SATA drives via USB-C or USB 3.0
  • Transfer up to 5 Gbps on USB 3.0, 480 Mbps on USB 2.0
  • UASP support boosts read speeds 70% and write speeds 40% on compatible systems
  • Works with Windows 11/10/8/7, macOS 10.8+, Linux, Chrome OS and Android
  • Hot-swappable plug-and-play for quick data recovery, backup or storage expansion

Specifikationer

BrandLUOM
ModelL06B2IN1
Changer TypeUSB to SATA
SpecificationsSupports Standard Notebook 2.5" SATA and SATA II Hard drives.
Transfer Rates Up to 5 Gbps when connected to a USB 3.0 port.
Transfer Rates Up to 480 Mbps when connected to a USB 2.0 port.
Hot-swappable, plug and play, no drivers needed.
Backwards-Compatible with USB 3.0, 2.0 or 1.1 & USB-C
FeaturesQuick Access to SATA SSD/HDD: USB to SATA 3.0/usb-c adapter facilitates the quick connection of 2.5" SSD/HDD to USB-A equipped devices. It is useful for expanding storage, upgrading systems, backing up files, retrieving and recovering data, as well as transferring data. It is particularly helpful for booting up old spare hard disks and recovering important files from broken PC.
?
Wide Compatibility: The USB to SATA converter is compatible with various operating systems, including Windows (11/10/8/8.1/7/Vista/XP), MacOS, Linux, Chrome, and Android. Sata cables supports most 2.5" SATA
Package Contents2in1 USB-C/USB 3.0 to SSD/2.5" SATA Adapter Cable X 1

Frågor om den här produkten

Does the LUOM L06B2IN1 adapter need an external power supply for a 2.5" SATA drive?

No, the adapter draws power from the host USB port and works with standard 2.5" SATA SSDs and HDDs without a separate supply.

Will the adapter run at USB 3.0 speed when I plug it into an older USB 2.0 port on my laptop?

It falls back to USB 2.0 transfer rates of up to 480 Mbps on a USB 2.0 port, and resumes 5 Gbps on a USB 3.0 port.

How can I confirm UASP is active after connecting the adapter to my Windows 10 PC?

Open Device Manager, locate the drive under Disk Drives, check Properties > Details > Hardware Ids; a UASP entry indicates the protocol is enabled.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.