Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green circuit board with black memory chips, no heat spreader, 288-pin DDR5 UDIMM form factor

NEMIX RAM

NEMIX RAM 16GB DDR5 5200 CL38 1Rx8 UDIMM memory upgrade

SKU CH-BYHT-7S98W

A 16 GB DDR5 UDIMM running at 5200 MT/s with CL38 latency and 1.1 V operation

  • Capacity16GB
  • SpeedDDR5 5200 (PC5 41600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB DDR5 5200 memory boosts system responsiveness
  • CL38 latency keeps data access tight for everyday workloads
  • 1 V operation reduces power draw and heat output
  • Single-rank 1Rx8 layout simplifies motherboard compatibility
  • 288-pin UDIMM form factor fits standard desktop slots

16 GB DDR5 5200 UDIMM

This 16 GB DDR5 module runs at 5200 MT/s with a CAS latency of 38. It uses a 1Rx8 unbuffered layout on a standard 288-pin UDIMM form factor and operates at 1.10 V. The kit is built for desktop systems that accept DDR5 non-ECC memory.

Suits single-slot upgrades on DDR5 boards

Builders who need a single 16 GB stick to fill one slot or to start a new DDR5 platform will find this module compatible with the listed Kingston reference. Systems requiring ECC, registered DIMMs, or higher-density ranks should look at a different specification.

Fits standard DDR5 desktop motherboards

The 288-pin UDIMM plugs directly into any desktop board with a DDR5 slot that supports non-ECC unbuffered memory at 1.10 V. Using one module leaves remaining slots free for future expansion, while the low 1.10 V operation keeps power draw modest for the memory subsystem.

I korthet

  • 16 GB DDR5 5200 memory boosts system responsiveness
  • CL38 latency keeps data access tight for everyday workloads
  • 1 V operation reduces power draw and heat output
  • Single-rank 1Rx8 layout simplifies motherboard compatibility
  • 288-pin UDIMM form factor fits standard desktop slots

Specifikationer

BrandNEMIX RAM
SeriesKingston Desktop PC Compatible Series Memory
ModelKingston DDR5 5200MHZ ECC Unbuffered UDIMM
Part NumberMD41600-618K1
Capacity16GB
SpeedDDR5 5200 (PC5 41600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemKingston
CAS LatencyCL38
Heat SpreaderNo
Type288-PIN DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR5 5200MHZ PC5-41600 1Rx8 1.1V CL44 288-PIN Non-ECC Unbuffered UDIMM

Frågor om den här produkten

Does this DDR5 5200 UDIMM require a motherboard with a DDR5 288-pin slot?

Yes, the module uses the DDR5 288-pin UDIMM form factor and needs a compatible DDR5 motherboard slot to function.

Will this CL38 1.10V stick run at its rated speed next to a slower DDR5 module?

The system will typically clock all installed DDR5 memory down to the speed of the slowest module present.

How can I verify the 16GB stick is running at 5200 MT/s after installation?

Check the memory speed in the BIOS or use a system information tool like CPU-Z to confirm the operating frequency.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.