We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, no heat spreader, 288-pin DDR5 UDIMM form factor

NEMIX RAM

NEMIX RAM 16GB DDR5 5200 CL38 1Rx8 UDIMM memory upgrade

SKU CH-BYHT-7S98W

A 16 GB DDR5 UDIMM running at 5200 MT/s with CL38 latency and 1.1 V operation

  • Capacity16GB
  • SpeedDDR5 5200 (PC5 41600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB DDR5 5200 memory boosts system responsiveness
  • CL38 latency keeps data access tight for everyday workloads
  • 1 V operation reduces power draw and heat output
  • Single-rank 1Rx8 layout simplifies motherboard compatibility
  • 288-pin UDIMM form factor fits standard desktop slots

16 GB DDR5 5200 UDIMM

This 16 GB DDR5 module runs at 5200 MT/s with a CAS latency of 38. It uses a 1Rx8 unbuffered layout on a standard 288-pin UDIMM form factor and operates at 1.10 V. The kit is built for desktop systems that accept DDR5 non-ECC memory.

Suits single-slot upgrades on DDR5 boards

Builders who need a single 16 GB stick to fill one slot or to start a new DDR5 platform will find this module compatible with the listed Kingston reference. Systems requiring ECC, registered DIMMs, or higher-density ranks should look at a different specification.

Fits standard DDR5 desktop motherboards

The 288-pin UDIMM plugs directly into any desktop board with a DDR5 slot that supports non-ECC unbuffered memory at 1.10 V. Using one module leaves remaining slots free for future expansion, while the low 1.10 V operation keeps power draw modest for the memory subsystem.

Highlights

  • 16 GB DDR5 5200 memory boosts system responsiveness
  • CL38 latency keeps data access tight for everyday workloads
  • 1 V operation reduces power draw and heat output
  • Single-rank 1Rx8 layout simplifies motherboard compatibility
  • 288-pin UDIMM form factor fits standard desktop slots

Specifications

BrandNEMIX RAM
SeriesKingston Desktop PC Compatible Series Memory
ModelKingston DDR5 5200MHZ ECC Unbuffered UDIMM
Part NumberMD41600-618K1
Capacity16GB
SpeedDDR5 5200 (PC5 41600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemKingston
CAS LatencyCL38
Heat SpreaderNo
Type288-PIN DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR5 5200MHZ PC5-41600 1Rx8 1.1V CL44 288-PIN Non-ECC Unbuffered UDIMM

Questions about this item

Does this DDR5 5200 UDIMM require a motherboard with a DDR5 288-pin slot?

Yes, the module uses the DDR5 288-pin UDIMM form factor and needs a compatible DDR5 motherboard slot to function.

Will this CL38 1.10V stick run at its rated speed next to a slower DDR5 module?

The system will typically clock all installed DDR5 memory down to the speed of the slowest module present.

How can I verify the 16GB stick is running at 5200 MT/s after installation?

Check the memory speed in the BIOS or use a system information tool like CPU-Z to confirm the operating frequency.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.