Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Two green DDR5 RDIMM modules with black chips and gold contacts

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 4800 ECC RDIMM CL40 1Rx8 1.1V Supermicro H13DSG-O-CPU-D memory upgrade

SKU CH-DJJJ-9M246

A 32 GB kit of two 16 GB DDR5-4800 ECC registered RDIMMs at CL40 and 1.1 V, validated for the Supermicro H13DSG-O-CPU-D motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

Visa 30 fler konfigurationer
  • 32 GB dual-channel capacity from two matched 16 GB modules
  • DDR5 4800 speed with CL40 latency for rated server throughput
  • 1 V registered ECC design corrects single-bit errors on the fly
  • 288-pin RDIMM form factor matches Supermicro H13DSG-O-CPU-D slot requirements
  • 1Rx8 rank layout recognised by the memory controller at full population

Exact-match DDR5-4800 RDIMM kit

This 32GB kit contains two 16GB DDR5 ECC Registered DIMMs rated at 4800 MT/s with CL40 latency and 1.1V operation. It is built for the Supermicro H13DSG-O-CPU-D motherboard and matches the board's required 288-pin RDIMM form factor, rank structure and voltage.

Sustained-load stability

Registered buffering reduces electrical load on the memory controller so all populated slots run at the rated 4800 MT/s without downclocking. On-die ECC corrects single-bit errors in real time, preventing silent data corruption during continuous server workloads.

1Rx8 rank configuration

The dual-rank-per-channel 1Rx8 organisation is the specific layout the H13DSG-O-CPU-D memory controller expects for full-capacity recognition. A different rank arrangement would not initialise at the rated speed or capacity.

I korthet

  • 32 GB dual-channel capacity from two matched 16 GB modules
  • DDR5 4800 speed with CL40 latency for rated server throughput
  • 1 V registered ECC design corrects single-bit errors on the fly
  • 288-pin RDIMM form factor matches Supermicro H13DSG-O-CPU-D slot requirements
  • 1Rx8 rank layout recognised by the memory controller at full population

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How much power does the 1.1 V DDR5 RDIMM kit draw when the server runs continuously?

Each module operates at 1.10 V; total draw depends on the motherboard's memory controller and population, so consult the Supermicro H13DSG-O-CPU-D manual for exact figures.

What motherboard slot and memory type must already be present for this 288-pin RDIMM kit to work?

The Supermicro H13DSG-O-CPU-D must provide DDR5 RDIMM slots; the kit will not fit UDIMM or SODIMM sockets.

Will this CL40 DDR5-4800 kit run at rated speed alongside slower DDR5 modules already installed?

Mixing speeds forces all channels to the slowest module; for full DDR5-4800 performance, populate every slot with matching 4800 MT/s RDIMMs.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.