BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00277761BTC
I lager
NEMIX RAM
NEMIX RAM 32GB DDR4 2666MHz ECC LRDIMM 2Rx4 CL19 1.2V 288-Pin HPE DL60 G9 Memory Upgrade
32 GB DDR4 2666 MHz ECC LRDIMM 2Rx4 CL19 1.2 V 288-pin for HPE ProLiant DL60 G9
- Capacity32GB
- SpeedDDR4 2666 (PC4 21300)
- ECCYes
- Buffered/RegisteredLoad Reduced
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32GB capacity expands server memory headroom for virtualisation workloads
- DDR4 2666MHz speed delivers high throughput for data-intensive applications
- ECC LRDIMM technology corrects errors and reduces electrical load on the memory bus
- CL19 latency at 1.2V balances responsive timing with efficient power use
- 288-pin 2Rx4 module validated for HPE ProLiant DL60 G9 compatibility
HPE DL60 G9 32 GB ECC LRDIMM
This NEMIX RAM module delivers 32 GB of DDR4 2666 ECC memory in a single load-reduced DIMM. It is built for administrators who need to expand the memory capacity of an HPE ProLiant DL60 G9 server without mixing ranks.
288-pin LRDIMM with major OEM chips
The module uses Samsung, Micron or Hynix DRAM in a 2Rx4 configuration and runs at 1.2 V with CL19 latency. Load-reduced buffering reduces electrical load on the server memory bus, allowing higher density per slot while the 288-pin DDR4 keying ensures correct insertion in the DL60 G9 DIMM sockets.
Upgrade from smaller RDIMMs or lower speeds
Replacing lower-capacity registered DIMMs with this 32 GB LRDIMM increases total system memory and can reduce the number of occupied slots. The jump is worthwhile when workloads such as virtualization or large databases demand more memory bandwidth and capacity than the original configuration provides.
I korthet
- 32GB capacity expands server memory headroom for virtualisation workloads
- DDR4 2666MHz speed delivers high throughput for data-intensive applications
- ECC LRDIMM technology corrects errors and reduces electrical load on the memory bus
- CL19 latency at 1.2V balances responsive timing with efficient power use
- 288-pin 2Rx4 module validated for HPE ProLiant DL60 G9 compatibility
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | HPE Server/Workstation Compatible Series Memory |
| Model | HPE DDR4 2666MHZ ECC LRDIMM Load Reduced Server Memory |
| Part Number | ML21300-324K1 |
| Capacity | 32GB |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | HPE |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 LRDIMM |
| Rank | 2Rx4 |
| Features | DDR4 ECC LRDIMM Load Reduced Server Motherboard Compatible |
| Package Content | 32GB (1X32GB) DDR4 2666MHZ PC4-21300 2Rx4 1.2V CL19 288-PIN ECC LRDIMM Load Reduced Server Memory |
Frågor om den här produkten
Does the DDR4 2666 interface cap speed at PC4-21300 for this LRDIMM?
Yes, the module runs at DDR4 2666 (PC4-21300) so the bus bandwidth is capped at that rate even if the server supports faster memory.
What physical slot and clearance does the 288-pin LRDIMM need in the HPE ProLiant DL60 G9?
It requires a standard 288-pin DDR4 DIMM slot; the module has no heat spreader so it fits in the normal memory bays without extra clearance.
How is the module installed and what step is often missed?
Power down the server, open the chassis, align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click, then verify in BIOS that the 32 GB ECC LRDIMM is detected at 2666 MT/s.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
