We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 32GB DDR4 2666MHz ECC LRDIMM 2Rx4 CL19 1.2V 288-Pin HPE DL60 G9 Memory Upgrade

SKU CH-BADK-1BTD5

32 GB DDR4 2666 MHz ECC LRDIMM 2Rx4 CL19 1.2 V 288-pin for HPE ProLiant DL60 G9

  • Capacity32GB
  • SpeedDDR4 2666 (PC4 21300)
  • ECCYes
  • Buffered/RegisteredLoad Reduced
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32GB capacity expands server memory headroom for virtualisation workloads
  • DDR4 2666MHz speed delivers high throughput for data-intensive applications
  • ECC LRDIMM technology corrects errors and reduces electrical load on the memory bus
  • CL19 latency at 1.2V balances responsive timing with efficient power use
  • 288-pin 2Rx4 module validated for HPE ProLiant DL60 G9 compatibility

HPE DL60 G9 32 GB ECC LRDIMM

This NEMIX RAM module delivers 32 GB of DDR4 2666 ECC memory in a single load-reduced DIMM. It is built for administrators who need to expand the memory capacity of an HPE ProLiant DL60 G9 server without mixing ranks.

288-pin LRDIMM with major OEM chips

The module uses Samsung, Micron or Hynix DRAM in a 2Rx4 configuration and runs at 1.2 V with CL19 latency. Load-reduced buffering reduces electrical load on the server memory bus, allowing higher density per slot while the 288-pin DDR4 keying ensures correct insertion in the DL60 G9 DIMM sockets.

Upgrade from smaller RDIMMs or lower speeds

Replacing lower-capacity registered DIMMs with this 32 GB LRDIMM increases total system memory and can reduce the number of occupied slots. The jump is worthwhile when workloads such as virtualization or large databases demand more memory bandwidth and capacity than the original configuration provides.

Highlights

  • 32GB capacity expands server memory headroom for virtualisation workloads
  • DDR4 2666MHz speed delivers high throughput for data-intensive applications
  • ECC LRDIMM technology corrects errors and reduces electrical load on the memory bus
  • CL19 latency at 1.2V balances responsive timing with efficient power use
  • 288-pin 2Rx4 module validated for HPE ProLiant DL60 G9 compatibility

Specifications

BrandNEMIX RAM
SeriesHPE Server/Workstation Compatible Series Memory
ModelHPE DDR4 2666MHZ ECC LRDIMM Load Reduced Server Memory
Part NumberML21300-324K1
Capacity32GB
SpeedDDR4 2666 (PC4 21300)
ECCYes
Buffered/RegisteredLoad Reduced
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemHPE
CAS LatencyCL19
Heat SpreaderNo
Type288-Pin DDR4 LRDIMM
Rank2Rx4
FeaturesDDR4 ECC LRDIMM Load Reduced Server Motherboard Compatible
Package Content32GB (1X32GB) DDR4 2666MHZ PC4-21300 2Rx4 1.2V CL19 288-PIN ECC LRDIMM Load Reduced Server Memory

Questions about this item

Does the DDR4 2666 interface cap speed at PC4-21300 for this LRDIMM?

Yes, the module runs at DDR4 2666 (PC4-21300) so the bus bandwidth is capped at that rate even if the server supports faster memory.

What physical slot and clearance does the 288-pin LRDIMM need in the HPE ProLiant DL60 G9?

It requires a standard 288-pin DDR4 DIMM slot; the module has no heat spreader so it fits in the normal memory bays without extra clearance.

How is the module installed and what step is often missed?

Power down the server, open the chassis, align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click, then verify in BIOS that the 32 GB ECC LRDIMM is detected at 2666 MT/s.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.