Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

NEMIX RAM

NEMIX RAM 32GB DDR5 5600MHz CL46 2Rx8 1.1V ECC UDIMM memory upgrade

SKU CH-VKKS-AW3BY

32 GB DDR5 ECC UDIMM running at 5600 MHz with CL46 latency and 1.1 V for Supermicro H13SRD-F and H13SRE-F motherboards

  • Capacity32GB
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • ECC corrects single-bit errors on the fly
  • 5600 MHz speed matches the controller spec exactly
  • 2Rx8 unbuffered layout fits the Supermicro H13SRD-F board
  • 1 V operation keeps power draw low
  • 288-pin DDR5 UDIMM form factor installs without adapters

Exact DDR5 upgrade for Supermicro H13SRD-F/H13SRE-F

This 32 GB DDR5 5600 MHz CL46 ECC UDIMM is built as an exact-match upgrade for the Supermicro H13SRD-F and H13SRE-F motherboards. It uses the 288-pin unbuffered ECC form factor those boards require so the memory controller recognises the module at full capacity and rated speed.

2Rx8 rank and 1.1 V voltage match the controller

The single specification that decides fitment is the 2Rx8 rank organisation combined with 1.1 V operating voltage. The motherboard’s memory controller expects this exact rank structure and voltage; a different rank or voltage will prevent the system from posting or running at the rated 5600 MT/s.

No heat spreader keeps the module within standard

The kit ships without a heat spreader, leaving the module at the standard UDIMM profile required by the board’s DIMM slots and population rules. This physical constraint ensures the DIMM seats correctly in dense server layouts where taller modules would interfere with adjacent components or airflow.

I korthet

  • ECC corrects single-bit errors on the fly
  • 5600 MHz speed matches the controller spec exactly
  • 2Rx8 unbuffered layout fits the Supermicro H13SRD-F board
  • 1 V operation keeps power draw low
  • 288-pin DDR5 UDIMM form factor installs without adapters

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-328K1
Capacity32GB
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Will the 5600 MHz speed actually run at 5600 MHz once installed?

The module is built to the exact DDR5-5600 (PC5-44800) specification your Supermicro board expects, so the memory controller will recognise it at full capacity and run it at its rated 5600 MHz speed.

What does the PC5-44800 rating mean for this DIMM?

PC5-44800 is the JEDEC standard name for DDR5-5600; it identifies the data-rate and timing class (CL46 at 1.1 V) that this unbuffered ECC UDIMM meets.

Does the 288-pin UDIMM fit the Supermicro H13SRD-F motherboard?

Yes, the 288-pin unbuffered ECC UDIMM form factor matches the slots on the H13SRD-F and H13SRE-F boards; it is not an RDIMM or SODIMM, so it seats directly.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.