Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green printed circuit board with black memory chips and gold edge connectors, no heat spreader

NEMIX RAM

NEMIX RAM 32GB DDR5 5600MHz PC5-44800 2Rx8 CL46 1.1V ECC Registered RDIMM memory upgrade

SKU CH-PZRC-2D252

32 GB DDR5 5600 MHz ECC Registered RDIMM validated for the Supermicro X14SDW-36C-SP9F motherboard

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB

  • 32 GB capacity lets you run larger workloads on the Supermicro X14SDW-36C-SP9F
  • DDR5 5600 MHz speed matches the motherboard's rated memory frequency
  • Registered ECC design corrects single-bit errors and buffers signals for full-slot stability
  • 2Rx8 rank organisation with CL46 timing meets the board's exact population rules
  • 1 V operation at 288-pin RDIMM form factor ensures correct voltage and physical fit

Exact-match DDR5 RDIMM for Supermicro

This 32 GB DDR5-5600 Registered ECC module is built to the precise rank, voltage and timing the Supermicro X14SDW-36C-SP9F motherboard expects. The 2Rx8 organisation, 1.10 V operating voltage and CL46 latency let the memory controller recognise full capacity at rated speed without manual tuning. It is intended for administrators upgrading or populating that specific server platform.

Registered buffer and ECC under sustained load

The registered architecture offloads the memory controller so every slot can run fully populated at full capacity during continuous workloads. On-die ECC catches and corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots before they reach production. The module operates at the standard 1.10 V, delivering stable throughput for long-running compute and virtualisation tasks.

Replaces mismatched or lower-capacity DDR5 RDIMMs

The jump is worth it when the board currently runs slower DDR5, unbuffered DIMMs, or a partial population that limits total memory. Installing this exact-spec 32 GB kit restores the platform's validated population rules and maximum supported capacity. It is not for systems that require UDIMM, SODIMM or non-ECC memory, or for boards that do not support 2Rx8 registered modules.

I korthet

  • 32 GB capacity lets you run larger workloads on the Supermicro X14SDW-36C-SP9F
  • DDR5 5600 MHz speed matches the motherboard's rated memory frequency
  • Registered ECC design corrects single-bit errors and buffers signals for full-slot stability
  • 2Rx8 rank organisation with CL46 timing meets the board's exact population rules
  • 1 V operation at 288-pin RDIMM form factor ensures correct voltage and physical fit

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K1
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How much power does the 1.1V DDR5 RDIMM draw when the server runs continuously?

The module operates at 1.1V, the standard voltage for DDR5 registered memory, keeping power draw low during sustained workloads.

What motherboard slot and memory population rules must my Supermicro X14SDW-36C-SP9F already have to accept this 288-pin RDIMM?

The board must provide DDR5 288-pin RDIMM slots and follow its manual's approved population order for 2Rx8 registered modules.

Will this 32GB 5600MHz CL46 ECC registered kit run at rated speed alongside slower DDR5 modules I keep in other slots?

The memory controller typically downclocks all installed DIMMs to the lowest common speed and loosest timings across channels.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.