Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Four green DDR5 RDIMM modules with gold contacts and black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 512GB (4×128GB) DDR5 4800 ECC RDIMM CL40 1.1V Supermicro H13DSG-O-CPU-D

SKU CH-CWFE-DDGEN

512 GB DDR5 server kit with four 128 GB registered ECC RDIMMs at 4800 MT/s, CL40, 1.1 V, validated for the Supermicro H13DSG-O-CPU-D motherboard

  • Capacity512GB (4 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 512GB 4X128GB

Visa 30 fler konfigurationer
  • 512 GB total capacity lets your Supermicro server handle massive datasets with four 128 GB modules
  • DDR5 4800 speed feeds the CPU fast enough for memory-bound workloads at rated frequency
  • Registered ECC design corrects single-bit errors on the fly to prevent silent data corruption
  • 10 V operation keeps power draw low while running every slot fully populated
  • 288-pin RDIMM form factor matches the H13DSG-O-CPU-D motherboard exactly for guaranteed fit

Capacity and purpose

This 512 GB kit delivers four 128 GB DDR5 registered ECC RDIMMs built for the Supermicro H13DSG-O-CPU-D motherboard. Each module runs at 4800 MT/s with CL40 timing at 1.1 V and a 2Rx4 organisation, giving the memory controller the exact rank, voltage and timing it expects for full-capacity recognition.

Sustained-load behaviour

Registered buffering offloads the memory controller so every slot remains stable when fully populated, while on-die ECC corrects single-bit errors during continuous operation. The 1.1 V operating voltage keeps power draw consistent across long workloads without thermal throttling or voltage drift.

Installation notes

The 288-pin RDIMM form factor fits only the registered DIMM slots on the target board; it will not seat in UDIMM or SODIMM sockets. Population order and maximum supported capacity vary by BIOS revision, so the system or motherboard manual must be consulted before fitting the modules.

I korthet

  • 512 GB total capacity lets your Supermicro server handle massive datasets with four 128 GB modules
  • DDR5 4800 speed feeds the CPU fast enough for memory-bound workloads at rated frequency
  • Registered ECC design corrects single-bit errors on the fly to prevent silent data corruption
  • 10 V operation keeps power draw low while running every slot fully populated
  • 288-pin RDIMM form factor matches the H13DSG-O-CPU-D motherboard exactly for guaranteed fit

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K4
Capacity512GB (4 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 4X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Does the 1.1 V DDR5 4800 kit draw significantly more power or run hotter than lower-capacity RDIMMs when the server runs 24/7?

Each 128 GB module operates at the standard 1.1 V DDR5 voltage, so power draw scales with capacity rather than exceeding the platform's thermal design for registered DIMMs.

What must the motherboard provide for this 4 × 128 GB kit to be recognised at full capacity?

The Supermicro H13DSG-O-CPU-D must support 288-pin DDR5 RDIMM slots, registered ECC operation, 2Rx4 rank structure and DDR5-4800 speed with CL40 timing.

Can I mix these 2Rx4 registered DDR5 modules with any existing DDR5 RDIMMs of a different rank or speed on the same board?

Mixing ranks or speeds is not recommended; the memory controller expects identical 2Rx4 DDR5-4800 CL40 modules in the populated slots for stable registered ECC operation.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.