Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Four green DDR5 RDIMM sticks in a row, no heat spreaders, 288-pin gold contacts visible

NEMIX RAM

NEMIX RAM 512GB (4x128GB) DDR5 4800 CL40 2Rx4 ECC RDIMM Supermicro H13SSH memory upgrade

SKU CH-5GPT-HBS6J

512GB kit of four 128GB DDR5-4800 CL40 2Rx4 registered ECC RDIMMs at 1.1V for Supermicro H13SSH servers

  • Capacity512GB (4 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 512GB 4X128GB

Visa 30 fler konfigurationer
  • 512 GB total capacity from four 128 GB modules maximises Supermicro H13SSH memory slots
  • DDR5 4800 speed with CL40 latency matches the board's rated timing for full-speed operation
  • Registered ECC design with 2Rx4 organisation offloads the memory controller and corrects single-bit errors
  • 1 V DDR5 voltage meets the platform's spec for stable, low-power server deployment
  • 288-pin RDIMM form factor is the exact physical and electrical fit for the H13SSH motherboard

Exact-match upgrade kit

This 512GB kit delivers four 128GB DDR5 4800 RDIMMs built to the Supermicro H13SSH memory controller's exact rank, voltage and timing requirements. Registered ECC architecture with CL40 latency and 1.1V operation ensures the modules are recognised at full capacity and run at rated speed without manual tuning.

Sustained-load behaviour

Registered buffering offloads the memory controller so every slot remains stable when fully populated, while on-die ECC corrects single-bit errors in real time to prevent silent data corruption during continuous workloads. The 2Rx4 organisation maintains signal integrity across all four modules under prolonged utilisation.

DDR5 interface limits

DDR5 4800 (PC5-38400) sets the maximum transfer rate this kit can achieve on the platform. Population rules, maximum supported capacity per slot and approved DIMM order are defined by the motherboard manual and must be verified before installation to avoid configuration conflicts.

I korthet

  • 512 GB total capacity from four 128 GB modules maximises Supermicro H13SSH memory slots
  • DDR5 4800 speed with CL40 latency matches the board's rated timing for full-speed operation
  • Registered ECC design with 2Rx4 organisation offloads the memory controller and corrects single-bit errors
  • 1 V DDR5 voltage meets the platform's spec for stable, low-power server deployment
  • 288-pin RDIMM form factor is the exact physical and electrical fit for the H13SSH motherboard

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K4
Capacity512GB (4 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 4X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How much power do the 1.1 V DDR5 4800 modules draw when the server runs continuously?

Each module operates at 1.10 V. Total system power depends on the Supermicro H13SSH motherboard and CPU load; the kit itself adds four registered DDR5 DIMMs at the rated voltage.

What motherboard slot type is required for this 288-pin RDIMM kit?

The Supermicro H13SSH must provide DDR5 288-pin RDIMM slots. The kit will not fit UDIMM or SODIMM sockets, and the board must support registered ECC memory.

Can I mix these 2Rx4 CL40 DDR5 RDIMMs with other DDR5 registered modules already installed in the H13SSH?

Mixing is possible only if the other modules are also DDR5 registered ECC RDIMMs with matching voltage and timing; the H13SSH memory population rules must be followed for full capacity recognition.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.