Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Two green DDR5 RDIMM sticks with black chips, no heat spreader, 288 pins

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5-5600 ECC RDIMM CL46 1.1V 2Rx8 288-pin Supermicro X14SDV-36C-SP3F memory upgrade

SKU CH-FDMD-RWW6X

64 GB DDR5-5600 ECC registered DIMM kit (2 × 32 GB, CL46, 1.1 V, 2Rx8) validated for the Supermicro X14SDV-36C-SP3F motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 2X32GB

  • 64GB dual-rank kit keeps every slot fully populated at rated speed
  • DDR5-5600 CL46 timing matches the memory controller spec for immediate recognition
  • Registered ECC architecture corrects single-bit errors on the fly to prevent silent data corruption
  • 1V operation meets the board's voltage requirement for stable enterprise workloads
  • Validated for the Supermicro X14SDV-36C-SP3F motherboard with 288-pin RDIMM form factor

Exact-fit 64GB DDR5-5600 ECC RDIMM kit

This NEMIX RAM kit delivers 64GB as two 32GB DDR5-5600 registered ECC modules built for the Supermicro X14SDV-36C-SP3F motherboard. Each 288-pin RDIMM runs at 1.1V with CL46 timing and 2Rx8 organisation so the memory controller recognises the full capacity at rated speed.

DDR5-5600 registered ECC bandwidth ceiling

The PC5-44800 interface caps usable throughput at the DDR5-5600 data rate while registered buffering and ECC add latency overhead versus unbuffered non-ECC alternatives. Full-slot population on this platform is limited by the board's own memory-population rules rather than the modules themselves.

Verify Supermicro X14SDV-36C-SP3F DIMM rules

Confirm the motherboard manual for approved capacity per slot, required population order and any BIOS version needed before installing this 2Rx8 registered kit. Systems needing unbuffered UDIMMs, SODIMMs, or a different voltage cannot use these modules.

I korthet

  • 64GB dual-rank kit keeps every slot fully populated at rated speed
  • DDR5-5600 CL46 timing matches the memory controller spec for immediate recognition
  • Registered ECC architecture corrects single-bit errors on the fly to prevent silent data corruption
  • 1V operation meets the board's voltage requirement for stable enterprise workloads
  • Validated for the Supermicro X14SDV-36C-SP3F motherboard with 288-pin RDIMM form factor

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Should I choose the 64GB kit or buy single 32GB modules for my Supermicro X14SDV-36C-SP3F?

The 64GB kit contains two matched 32GB modules (2Rx8) tested together for dual-channel operation. Buying singles risks timing mismatches that can prevent the board from running at the rated DDR5-5600 speed.

What does the DDR5-5600 (PC5-44800) rating deliver once installed in this Supermicro board?

The modules run at 5600 MT/s with CL46 latency at 1.1V, giving the maximum bandwidth the X14SDV-36C-SP3F memory controller supports when both slots are populated with registered ECC DIMMs.

How does the 288-pin RDIMM interface and registered ECC design affect real-world capacity limits?

The registered buffer lets the memory controller drive both 2Rx8 modules at full 5600 MT/s without signal degradation, while ECC corrects single-bit errors on the fly — essential for the 64GB capacity this board validates.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.