Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Two green DDR5 UDIMM sticks in a clear plastic tray

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 5600MHz CL46 1.1V 288-Pin UDIMM Supermicro X13SAE

SKU CH-BWXJ-W0JTD

A 64 GB DDR5 kit (2 × 32 GB) running at 5600 MHz CL46, 1.1 V, 288-pin UDIMM, validated for Supermicro X13SAE

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 64GB 2X32GB

  • 64 GB capacity from two 32 GB modules expands multitasking headroom
  • DDR5 5600 MHz speed with PC5-44800 bandwidth accelerates data throughput
  • CL46 CAS latency at 1.1 V delivers efficient timing for stable operation
  • 288-pin UDIMM form factor matches Supermicro X13SAE motherboard requirements exactly
  • Built with major OEM chips from Samsung, Micron or Hynix for tested reliability

Exact-Match Upgrade Kit

This 64GB kit contains two 32GB DDR5 UDIMM modules rated at 5600MHz with CL46 latency and 1.1V operation. It is built for the Supermicro X13SAE motherboard and uses the 288-pin unbuffered non-ECC form factor that board requires.

Targeted Compatibility

The kit suits owners of the Supermicro X13SAE who need 64GB of DDR5 memory matching the board's validated population rules. Builders using a different motherboard, or anyone requiring ECC, registered modules or SODIMMs, should look at other memory.

Deciding Specification

The critical figure is the DDR5 5600MHz PC5-44800 speed grade combined with 2Rx8 rank structure and 1.1V voltage; the motherboard must support this exact combination for the kit to run at its rated settings.

I korthet

  • 64 GB capacity from two 32 GB modules expands multitasking headroom
  • DDR5 5600 MHz speed with PC5-44800 bandwidth accelerates data throughput
  • CL46 CAS latency at 1.1 V delivers efficient timing for stable operation
  • 288-pin UDIMM form factor matches Supermicro X13SAE motherboard requirements exactly
  • Built with major OEM chips from Samsung, Micron or Hynix for tested reliability

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How can I confirm the kit is running at DDR5 5600 CL46 after installation?

Enter the BIOS or use a tool like CPU-Z to verify the memory shows 5600 MT/s, CL46 timings, 1.10 V and 64 GB total across both 32 GB modules.

What comes in the box and is anything else required?

The package contains the 64 GB (2 × 32 GB) DDR5 5600 UDIMM kit only; no heat spreaders, cables or extra parts are included or needed.

Which version should I choose for a Supermicro X13SAE motherboard?

Select the MD44800-328K2 kit — 288-pin DDR5 5600 PC5-44800, 2Rx8 Non-ECC Unbuffered, 1.1 V CL46 — the exact specification the X13SAE requires.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.