Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Four green circuit boards with black chips and gold pins

NEMIX RAM

NEMIX RAM 64GB (4 x 16GB) DDR5 5600 CL46 1.1V UDIMM memory upgrade for Supermicro X14SAE-F

SKU CH-7CD4-CWGN8

A 64GB DDR5 kit of four 16GB UDIMM modules at 5600MHz CL46 1.1V, validated for the Supermicro X14SAE-F motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 64GB 4X16GB

  • 64 GB total capacity across four 16 GB modules for high-density multitasking
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth out of the box
  • 1 V operation reduces power draw while maintaining stability
  • Major OEM Samsung Micron Hynix chips tested for reliable performance at spec
  • Verified fit for Supermicro X14SAE-F motherboard with 288-pin UDIMM form factor

Exact-match DDR5 kit for Supermicro X14SAE-F

This 64 GB kit contains four 16 GB DDR5 UDIMMs rated at 5600 MT/s with CL46 latency and 1.1 V operation. It is built for the Supermicro X14SAE-F motherboard and delivers the precise rank, voltage, and timing that board expects for full-capacity recognition.

288-pin unbuffered layout with major OEM chips

The modules use a standard 288-pin unbuffered form factor, so they seat directly into the board's desktop DIMM slots without registered or ECC circuitry. Chips are sourced from Samsung, Micron, or Hynix and tested for stability at the rated speed, timing, and voltage.

Replaces smaller or slower DDR5 populations

The four-module kit fills the board's slots to reach 64 GB in a single validated configuration, removing the guesswork of mixing capacities or ranks. The jump is worth it when the workload needs the full capacity at the board's native DDR5 5600 specification.

I korthet

  • 64 GB total capacity across four 16 GB modules for high-density multitasking
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth out of the box
  • 1 V operation reduces power draw while maintaining stability
  • Major OEM Samsung Micron Hynix chips tested for reliable performance at spec
  • Verified fit for Supermicro X14SAE-F motherboard with 288-pin UDIMM form factor

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Does the DDR5 5600 (PC5-44800) rating guarantee the kit will run at 5600 MT/s on the Supermicro X14SAE-F?

The kit is rated for DDR5 5600 (PC5-44800) with CL46 at 1.1 V. The motherboard must support that speed and timing; if it does, the modules will operate at the rated data rate.

Will four 288-pin UDIMM modules fit the Supermicro X14SAE-F without clearance issues?

The kit contains four 288-pin unbuffered UDIMMs. They use the standard DDR5 UDIMM form factor required by the X14SAE-F, so they install in the board's four DIMM slots.

What is the correct installation order for the four 16 GB sticks on the X14SAE-F?

Populate the slots in the sequence specified by the Supermicro X14SAE-F manual — typically slot A2, then B2, then A1, then B1 — and seat each module until the retention clips click.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.