Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Four green DDR4 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR4 2933 CL21 ECC RDIMM memory upgrade

SKU CH-F9AB-PVZMP

64 GB kit of four 16 GB DDR4-2933 ECC registered RDIMMs at CL21 and 1.2 V for ASRock Rack ROMED8-2T EPYC motherboards

  • Capacity64GB (4 x 16GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V

Capacity 64GB 4X16GB

  • 64 GB kit expands server capacity
  • ECC registered design protects data integrity
  • 2933 MHz DDR4 speed supports demanding workloads
  • 2 V operation reduces power consumption
  • 288-pin RDIMM fits compatible ASRock EPYC motherboards

Compatible server memory kit

This 64GB kit contains four 16GB DDR4 RDIMM modules built for ASRock Rack ROMED8-2T motherboards. It targets IT professionals who need registered ECC memory for AMD EPYC server platforms. The modules run at 2933MHz with a CL21 latency profile.

Straightforward DIMM installation

Each 288-pin module seats in the standard DDR4 RDIMM slots without tools or cables. The registered design adds a clock cycle, so the motherboard must support registered memory or the system will not post. Mixing these with unbuffered DIMMs or populating slots in the wrong order are the most common errors.

Registered ECC with 2Rx8 organisation

The single specification that determines fit is the 2Rx8 registered ECC configuration at 1.2V. Boards that require unbuffered, single-rank or non-ECC modules will not work with this kit.

I korthet

  • 64 GB kit expands server capacity
  • ECC registered design protects data integrity
  • 2933 MHz DDR4 speed supports demanding workloads
  • 2 V operation reduces power consumption
  • 288-pin RDIMM fits compatible ASRock EPYC motherboards

Specifikationer

BrandNEMIX RAM
SeriesASRock Server Motherboard Compatible Series Memory
ModelASRock DDR4 2933MHZ ECC RDIMM Registered Server Memory
Part NumberMR23400-628K4
Capacity64GB (4 x 16GB)
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (4X16GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How do I confirm the kit runs at 2933 MT/s with CL21 after installation?

Enter the BIOS or UEFI and verify the memory frequency reads 2933 MT/s and the CAS latency shows 21 cycles; the registered ECC modules will also report ECC active in the system health screen.

What comes in the package and do I need extra parts for the ASRock Rack ROMED8-2T?

The box contains four 16 GB DDR4 288-pin RDIMMs for a total of 64 GB; no additional memory components are required for the listed motherboard.

Why choose the 64 GB 2Rx8 registered kit instead of a smaller or unbuffered option?

This 64 GB kit uses 2Rx8 registered ECC modules at 1.2 V, matching the EPYC platform requirements for the ASRock Rack ROMED8-2T, while smaller or unbuffered kits would not provide the same capacity or error correction.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.