Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Four green DDR4 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR4 2933 CL21 ECC RDIMM memory upgrade

SKU CH-F9AB-PVZMP

64 GB kit of four 16 GB DDR4-2933 ECC registered RDIMMs at CL21 and 1.2 V for ASRock Rack ROMED8-2T EPYC motherboards

  • Capacity64GB (4 x 16GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V

Capacity 64GB 4X16GB

  • 64 GB kit expands server capacity
  • ECC registered design protects data integrity
  • 2933 MHz DDR4 speed supports demanding workloads
  • 2 V operation reduces power consumption
  • 288-pin RDIMM fits compatible ASRock EPYC motherboards

Compatible server memory kit

This 64GB kit contains four 16GB DDR4 RDIMM modules built for ASRock Rack ROMED8-2T motherboards. It targets IT professionals who need registered ECC memory for AMD EPYC server platforms. The modules run at 2933MHz with a CL21 latency profile.

Straightforward DIMM installation

Each 288-pin module seats in the standard DDR4 RDIMM slots without tools or cables. The registered design adds a clock cycle, so the motherboard must support registered memory or the system will not post. Mixing these with unbuffered DIMMs or populating slots in the wrong order are the most common errors.

Registered ECC with 2Rx8 organisation

The single specification that determines fit is the 2Rx8 registered ECC configuration at 1.2V. Boards that require unbuffered, single-rank or non-ECC modules will not work with this kit.

Pluspunten

  • 64 GB kit expands server capacity
  • ECC registered design protects data integrity
  • 2933 MHz DDR4 speed supports demanding workloads
  • 2 V operation reduces power consumption
  • 288-pin RDIMM fits compatible ASRock EPYC motherboards

Specificaties

BrandNEMIX RAM
SeriesASRock Server Motherboard Compatible Series Memory
ModelASRock DDR4 2933MHZ ECC RDIMM Registered Server Memory
Part NumberMR23400-628K4
Capacity64GB (4 x 16GB)
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (4X16GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How do I confirm the kit runs at 2933 MT/s with CL21 after installation?

Enter the BIOS or UEFI and verify the memory frequency reads 2933 MT/s and the CAS latency shows 21 cycles; the registered ECC modules will also report ECC active in the system health screen.

What comes in the package and do I need extra parts for the ASRock Rack ROMED8-2T?

The box contains four 16 GB DDR4 288-pin RDIMMs for a total of 64 GB; no additional memory components are required for the listed motherboard.

Why choose the 64 GB 2Rx8 registered kit instead of a smaller or unbuffered option?

This 64 GB kit uses 2Rx8 registered ECC modules at 1.2 V, matching the EPYC platform requirements for the ASRock Rack ROMED8-2T, while smaller or unbuffered kits would not provide the same capacity or error correction.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.