Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Four green DDR5 RDIMM modules, bare circuit boards with gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 4800 CL40 1Rx8 1.1V ECC RDIMM 288-Pin memory upgrade

SKU CH-ZAEJ-0CBT9

64 GB DDR5 ECC registered server kit with four 16 GB modules at 4800 MT/s CL40, 1.1 V, 288-pin, validated for Supermicro GPU SuperServer systems

  • Capacity64GB (4 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • ECC protection ensures data integrity for critical workloads
  • Registered design stabilises signal quality on dense server boards
  • 4800 MT/s DDR5 speed feeds high-throughput GPU servers
  • 1 V operation reduces power draw across 64 GB capacity
  • 4-module kit simplifies population of SuperMicro 421/821 platforms

64 GB DDR5 ECC RDIMM kit for Supermicro servers

This NEMIX RAM kit provides 64 GB of DDR5 memory across four 16 GB registered DIMMs. It targets administrators upgrading Supermicro GPU SuperServer platforms such as the SYS-821GE-TNHR, SYS-821GV-TNR and SYS-421GE-TNRT. The modules run at 4800 MT/s with CL40 latency and operate at 1.1 V. ECC and registered buffering protect data integrity in mission-critical workloads.

Fits DDR5 RDIMM slots on qualified Supermicro

Each 288-pin module installs directly into the server's registered DIMM sockets without additional hardware. The 1Rx8 organisation allows the memory controller to address the full capacity efficiently. Registered signalling reduces electrical load on the memory bus, freeing the platform to populate all available slots. No heat spreaders are fitted, so airflow in the chassis must be sufficient for bare modules.

Replaces slower or smaller DDR5 RDIMM configurations

The kit upgrades systems running lower-capacity or lower-speed registered DDR5 memory. The jump is worthwhile when workloads demand the full 64 GB at 4800 MT/s with ECC protection. It is not suited for builds that require unbuffered UDIMMs, non-ECC memory or speeds beyond the specified 4800 MT/s rating.

I korthet

  • ECC protection ensures data integrity for critical workloads
  • Registered design stabilises signal quality on dense server boards
  • 4800 MT/s DDR5 speed feeds high-throughput GPU servers
  • 1 V operation reduces power draw across 64 GB capacity
  • 4-module kit simplifies population of SuperMicro 421/821 platforms

Specifikationer

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K4
Capacity64GB (4 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (4X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Frågor om den här produkten

Does the CL40 latency become a bottleneck when the 64GB kit runs at 4800 MT/s under sustained load?

CL40 is the rated CAS latency for these DDR5 4800 modules; the registered design adds one cycle of buffering, so the limit you hit first is the platform's maximum supported memory speed rather than the module latency itself.

What thermal or acoustic impact do the bare 288-pin RDIMMs add during continuous operation?

The modules have no heat spreader and draw 1.10 V; they rely on server chassis airflow, so noise and heat depend entirely on the system's fan profile, not the DIMMs themselves.

Which motherboard feature must already be present for this 288-pin ECC RDIMM kit to function?

The board must provide DDR5 RDIMM slots with registered ECC support; the kit is validated for Supermicro GPU SuperServer models including SYS-821GE-TNHR, SYS-821GV-TNR and SYS-421GE-TNRT.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.