BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00277761BTC
재고 있음
NEMIX RAM
NEMIX RAM 64GB (4x16GB) DDR5 4800 CL40 1Rx8 1.1V ECC RDIMM 288-Pin memory upgrade
64 GB DDR5 ECC registered server kit with four 16 GB modules at 4800 MT/s CL40, 1.1 V, 288-pin, validated for Supermicro GPU SuperServer systems
- Capacity64GB (4 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- ECC protection ensures data integrity for critical workloads
- Registered design stabilises signal quality on dense server boards
- 4800 MT/s DDR5 speed feeds high-throughput GPU servers
- 1 V operation reduces power draw across 64 GB capacity
- 4-module kit simplifies population of SuperMicro 421/821 platforms
64 GB DDR5 ECC RDIMM kit for Supermicro servers
This NEMIX RAM kit provides 64 GB of DDR5 memory across four 16 GB registered DIMMs. It targets administrators upgrading Supermicro GPU SuperServer platforms such as the SYS-821GE-TNHR, SYS-821GV-TNR and SYS-421GE-TNRT. The modules run at 4800 MT/s with CL40 latency and operate at 1.1 V. ECC and registered buffering protect data integrity in mission-critical workloads.
Fits DDR5 RDIMM slots on qualified Supermicro
Each 288-pin module installs directly into the server's registered DIMM sockets without additional hardware. The 1Rx8 organisation allows the memory controller to address the full capacity efficiently. Registered signalling reduces electrical load on the memory bus, freeing the platform to populate all available slots. No heat spreaders are fitted, so airflow in the chassis must be sufficient for bare modules.
Replaces slower or smaller DDR5 RDIMM configurations
The kit upgrades systems running lower-capacity or lower-speed registered DDR5 memory. The jump is worthwhile when workloads demand the full 64 GB at 4800 MT/s with ECC protection. It is not suited for builds that require unbuffered UDIMMs, non-ECC memory or speeds beyond the specified 4800 MT/s rating.
주요 특징
- ECC protection ensures data integrity for critical workloads
- Registered design stabilises signal quality on dense server boards
- 4800 MT/s DDR5 speed feeds high-throughput GPU servers
- 1 V operation reduces power draw across 64 GB capacity
- 4-module kit simplifies population of SuperMicro 421/821 platforms
사양
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx8 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 64GB (4X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
이 상품에 대한 질문
Does the CL40 latency become a bottleneck when the 64GB kit runs at 4800 MT/s under sustained load?
CL40 is the rated CAS latency for these DDR5 4800 modules; the registered design adds one cycle of buffering, so the limit you hit first is the platform's maximum supported memory speed rather than the module latency itself.
What thermal or acoustic impact do the bare 288-pin RDIMMs add during continuous operation?
The modules have no heat spreader and draw 1.10 V; they rely on server chassis airflow, so noise and heat depend entirely on the system's fan profile, not the DIMMs themselves.
Which motherboard feature must already be present for this 288-pin ECC RDIMM kit to function?
The board must provide DDR5 RDIMM slots with registered ECC support; the kit is validated for Supermicro GPU SuperServer models including SYS-821GE-TNHR, SYS-821GV-TNR and SYS-421GE-TNRT.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
