Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green bare circuit board DDR5 RDIMM module with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 96GB DDR5 5600 CL46 2Rx4 ECC RDIMM for GIGABYTE MZ73-LM0 memory upgrade

SKU CH-G569-FPR7T

96GB DDR5-5600 ECC registered RDIMM validated for the GIGABYTE MZ73-LM0 motherboard with CL46 timing, 1.1V operation and 2Rx4 rank

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB

Visa 24 fler konfigurationer
  • 96 GB capacity expands server memory headroom for large workloads
  • DDR5 5600 speed delivers rated throughput for the Gigabyte MZ73-LM0 platform
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 2Rx4 organisation with 1.10 V operation matches the board's required rank and voltage
  • 288-pin RDIMM form factor fits the exact slot specification for verified fitment

Exact-match DDR5-5600 upgrade for GIGABYTE MZ73-LM0

This 96GB DDR5 5600 CL46 2Rx4 ECC RDIMM kit is built as a drop-in upgrade for the GIGABYTE MZ73-LM0 motherboard. It matches the board's required 288-pin registered form factor, voltage and timing so the memory controller recognises the full capacity at rated speed. Server administrators and IT teams deploying this platform can install it without manual tuning.

Registered ECC build with 288-pin RDIMM connector

The modules use a registered architecture that buffers address and command signals, allowing every slot to run fully populated at 96GB per module. ECC circuitry catches and corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots. The 288-pin RDIMM edge connector fits only motherboards wired for registered DDR5; it will not seat in UDIMM or SODIMM slots.

1.1V operation keeps thermals and power low

Running at 1.10V, the kit draws minimal power for its density, reducing heat output inside dense server chassis. No heat spreader is fitted, so airflow across the bare PCB is the primary cooling path; standard server fan walls handle this without extra noise. The low voltage also eases load on the motherboard's VRM phases during sustained workloads.

I korthet

  • 96 GB capacity expands server memory headroom for large workloads
  • DDR5 5600 speed delivers rated throughput for the Gigabyte MZ73-LM0 platform
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 2Rx4 organisation with 1.10 V operation matches the board's required rank and voltage
  • 288-pin RDIMM form factor fits the exact slot specification for verified fitment

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

What DDR5 speed and PC5 rating does this 96GB RDIMM run at?

This module operates at DDR5 5600 with a PC5-44800 data rate, matching the GIGABYTE MZ73-LM0 memory controller specification.

Which physical slot and pin count does this ECC RDIMM require?

It uses the standard 288-pin DDR5 RDIMM form factor, so it fits only a server motherboard DIMM slot that accepts registered modules.

How should the 2Rx4 registered DIMMs be populated on the MZ73-LM0, and what step is often missed?

Follow the motherboard manual for the approved population order; a common mistake is mixing registered and unbuffered DIMMs or skipping the required slot sequence.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.