Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Two green DDR4 RDIMM modules with gold contacts and black chips, no heat spreader

NEMIX RAM

NEMIX RAM DDR4 512GB (2x256GB) 3200MHz CL22 ECC RDIMM Server Memory Kit for Supermicro X12QCH+

SKU CH-HZRT-TCH6D

512 GB DDR4 server memory kit with two 256 GB registered ECC RDIMMs at 3200 MHz CL22 for the Supermicro X12QCH+ motherboard

  • Capacity512GB (2 x 256GB)
  • Type288-Pin DDR4 RDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Size 512GB 2X256GB

Visa 8 fler konfigurationer
  • 512 GB total capacity from two 256 GB modules for maximum server density
  • DDR4 3200 speed with CL22 latency delivers rated throughput for Supermicro X12QCH+
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 2 V operation at 8Rx4 rank matches the board's exact electrical requirements
  • 288-pin RDIMM form factor ensures correct physical fit in every supported slot

NEMIX RAM 512GB DDR4 ECC RDIMM Kit

This 512GB kit contains two 256GB DDR4-3200 Registered ECC modules built for the Supermicro X12QCH+ motherboard. The 8Rx4 organisation, CL22 timing and 1.20V operation match the board's memory controller requirements exactly. It is designed for servers that need maximum capacity per slot in a registered DIMM form factor.

Sustained Load Stability

Registered buffering reduces electrical load on the memory controller so all slots can run fully populated at the rated 3200 MT/s without throttling. On-die ECC corrects single-bit errors in real time, preventing silent data corruption during long compute runs or virtualisation workloads. The modules operate at standard 1.20V DDR4 voltage for consistent thermal behaviour under continuous duty.

Upgrade From Lower-Capacity RDIMMs

This kit replaces smaller Registered ECC DIMMs when the application demands more memory per channel than the previous configuration provides. The jump is worthwhile when the workload exceeds the capacity of the existing modules and the motherboard population rules allow two 256GB 8Rx4 DIMMs. It is not for systems that require unbuffered UDIMMs, SODIMM form factors or speeds other than DDR4-3200.

I korthet

  • 512 GB total capacity from two 256 GB modules for maximum server density
  • DDR4 3200 speed with CL22 latency delivers rated throughput for Supermicro X12QCH+
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 2 V operation at 8Rx4 rank matches the board's exact electrical requirements
  • 288-pin RDIMM form factor ensures correct physical fit in every supported slot

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR4 ECC RDIMM Registered Server Memory
Part NumberMR25600-2584K2
Capacity512GB (2 x 256GB)
Type288-Pin DDR4 RDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank8Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC RDIMM Motherboard Compatible
Package Content512GB 2X256GB DDR4 3200MHz PC4-25600 8Rx4 1.2V 288-PIN ECC RDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How much power does the 512GB DDR4-3200 kit draw at its rated 1.20V?

Each 256GB RDIMM operates at 1.20V; total power depends on the Supermicro X12QCH+ memory controller and population rules, so consult the board manual for exact draw under full load.

What motherboard slot and population rules are required for this 2x256GB RDIMM kit?

The kit uses 288-pin DDR4 RDIMM slots on the Supermicro X12QCH+; follow the board manual for approved DIMM order and maximum capacity per channel.

Will the 8Rx4 registered ECC modules work alongside existing DDR4 RDIMMs in the same server?

Mixing ranks or capacities can prevent full-speed operation; the board manual specifies which slot combinations are supported for 8Rx4 registered ECC DIMMs.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.