Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Two green DDR5 UDIMM sticks with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 32GB (2x16GB) 5600MHz CL46 1.1V UDIMM Supermicro BH4SR2-25G memory upgrade

SKU CH-FXCC-NA8PP

32 GB dual-channel DDR5 kit at 5600 MHz with CL46 latency and 1.1 V operation for Supermicro BH4SR2-25G boards

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB total capacity from two 16 GB modules
  • DDR5 5600 speed rated at PC5-44800
  • Low 1.10 V operating voltage for efficiency
  • CL46 CAS latency with 1Rx8 single-rank layout
  • Validated for Supermicro BH4SR2-25G motherboard

32GB DDR5 kit for Supermicro BH4SR2-25G

This 32GB kit contains two 16GB DDR5 modules rated at 5600MHz with CL46 timings. It is built as non-ECC unbuffered UDIMM memory for desktop systems. The kit is validated for the Supermicro BH4SR2-25G motherboard. It suits users upgrading that specific platform.

Low voltage and no heat spreader

Each module runs at 1.1V, keeping power draw modest during typical desktop workloads. The absence of a heat spreader means the modules rely on case airflow alone. In normal use they operate silently with no active cooling. Power consumption stays low at standard JEDEC voltage.

Steady JEDEC operation under sustained load

At the rated 5600MHz and CL46 the modules maintain stock settings without overclocking headroom. Extended workloads stay within the 1.1V specification so thermals remain predictable. No thermal throttling is expected when case ventilation is adequate. Performance is consistent for long compute sessions.

I korthet

  • 32 GB total capacity from two 16 GB modules
  • DDR5 5600 speed rated at PC5-44800
  • Low 1.10 V operating voltage for efficiency
  • CL46 CAS latency with 1Rx8 single-rank layout
  • Validated for Supermicro BH4SR2-25G motherboard

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K2
Capacity32GB (2 x 16GB)
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (2 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Frågor om den här produkten

How do I install the 288-Pin DDR5 UDIMM modules in my Supermicro BH4SR2-25G motherboard?

Align the notch on each 1Rx8 module with the slot key, press down firmly until the retention clips click, and populate the channels specified in the motherboard manual for dual-channel operation.

Will the Samsung, Micron or Hynix chips on these modules need replacement during the system's life?

The memory chips are solid-state with no moving parts and are rated for continuous operation at 1.1V; they do not have a scheduled replacement interval.

At what point does the CL46 latency limit throughput during sustained workloads?

CL46 sets the minimum command-to-data delay at 5600 MT/s; under sustained loads the memory controller cannot issue new reads faster than this timing allows.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.