Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Two green circuit boards with black chips and gold contacts side by side

NEMIX RAM

NEMIX RAM DDR5 4800 ECC Unbuffered UDIMM 32GB 2x16GB CL40 1.1V 1Rx8 memory upgrade

SKU CH-90J4-M2C60

A 32 GB DDR5 ECC unbuffered UDIMM kit, two 16 GB modules at 4800 MT/s CL40 1.10 V, validated for Supermicro X14SAE motherboards

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

  • ECC corrects single-bit errors on the fly, preventing silent data corruption and crashes
  • 32GB kit (2×16GB) DDR5-4800 CL40 1.10V matches the Supermicro X14SAE memory controller exactly
  • 288-pin unbuffered UDIMM form factor fits the board's required slot type, not RDIMM or SODIMM
  • 1Rx8 single-rank organisation and major-brand Samsung, Micron or Hynix chips deliver rated speed and capacity
  • Lifetime replacement warranty and free US-based technical support back the upgrade

Exact-Match DDR5 Upgrade Kit

This 32 GB kit contains two 16 GB DDR5 4800 UDIMMs built to the precise 1Rx8 rank, 1.10 V voltage and CL40 timing the memory controller expects. It is intended for administrators and workstation builders who need verified fitment on the Supermicro X14SAE motherboard.

Thermals Noise and Power

The modules run at the standard 1.10 V DDR5 voltage with no heat spreader, so power draw and thermal output remain at JEDEC baseline levels for unbuffered ECC UDIMMs. Acoustic contribution is negligible because the DIMMs have no active cooling.

ECC Reliability and Fitment

On-die ECC detects and corrects single-bit errors to prevent silent data corruption and unplanned reboots during critical workloads. The kit matches the board's required 288-pin unbuffered ECC form factor and population rules, eliminating guesswork during installation.

I korthet

  • ECC corrects single-bit errors on the fly, preventing silent data corruption and crashes
  • 32GB kit (2×16GB) DDR5-4800 CL40 1.10V matches the Supermicro X14SAE memory controller exactly
  • 288-pin unbuffered UDIMM form factor fits the board's required slot type, not RDIMM or SODIMM
  • 1Rx8 single-rank organisation and major-brand Samsung, Micron or Hynix chips deliver rated speed and capacity
  • Lifetime replacement warranty and free US-based technical support back the upgrade

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME38400-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC UDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How do I install the 288-pin DDR5 ECC UDIMM kit on my Supermicro X14SAE motherboard, and which population step is often missed?

Insert each 16 GB module into the slots listed first in the Supermicro X14SAE manual, pressing until the ejector tabs click; the step most people skip is confirming the exact DIMM order the board requires for dual-channel operation.

What maintenance or replacement will the 1Rx8 DDR5 ECC UDIMM kit need over its service life?

No scheduled maintenance is required; ECC corrects single-bit errors automatically, and the modules are covered by a lifetime replacement warranty if a hardware fault ever develops.

What limit appears first when the 4800 MHz CL40 1.1 V DDR5 ECC kit runs under sustained load?

The DDR5-4800 CL40 timing at 1.1 V is the fixed operating point; sustained workloads stay within this validated speed, latency and voltage envelope.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.