Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

NEMIX RAM

NEMIX RAM DDR5 5600 1.5TB 16x96GB ECC RDIMM Supermicro H14DSH memory upgrade

SKU CH-Q5W0-QA6YC

A 1.5 TB DDR5-5600 registered ECC kit of sixteen 96 GB modules at CL46 and 1.1 V, built for the Supermicro H14DSH motherboard

  • Capacity1.5TB (16 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Speed 5600MHz

  • Massive 1.5 TB capacity with sixteen 96 GB modules
  • DDR5 5600 speed rated at PC5-44800 for high throughput
  • Registered ECC design corrects single-bit errors automatically
  • Low 1.1 V operation reduces power draw per module
  • Exact-match 288-pin RDIMM kit validated for Supermicro H14DSH

Capacity and form factor

This kit supplies 1.5TB of DDR5 memory across sixteen 96GB registered DIMMs. It is built for the Supermicro H14DSH motherboard and other systems that accept 288-pin DDR5 RDIMMs with ECC. Each module runs at 1.10V and uses a 2Rx4 organisation.

Registered ECC architecture

The 2Rx4 registered design buffers address and command signals so the memory controller can drive all sixteen slots at the rated DDR5 5600 speed. ECC corrects single-bit errors on the fly, preventing silent data corruption in production workloads.

Sustained operation

Registered buffering keeps electrical loading stable when every slot is populated, allowing continuous throughput at CL46 without the signal degradation that can appear on unbuffered designs. The 1.10V operating voltage supports efficient long-running server deployments.

I korthet

  • Massive 1.5 TB capacity with sixteen 96 GB modules
  • DDR5 5600 speed rated at PC5-44800 for high throughput
  • Registered ECC design corrects single-bit errors automatically
  • Low 1.1 V operation reduces power draw per module
  • Exact-match 288-pin RDIMM kit validated for Supermicro H14DSH

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K16
Capacity1.5TB (16 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 16X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

What does the 5600MHz rating mean once the kit is installed in a Supermicro H14DSH server?

The modules run at DDR5-5600 (PC5-44800) with CL46 latency at 1.1V, delivering the full rated throughput the memory controller expects when all 16 slots are populated.

How does the 288-pin RDIMM interface limit or enable performance on this platform?

The 288-pin Registered DIMM form factor is required by the H14DSH; the registered buffer lets the memory controller drive all 16 slots at 5600MHz without signal degradation.

What physical clearance and slot population does the 16-module kit require?

Each 96GB module is a standard-height 288-pin RDIMM; the kit fills all 16 DIMM slots on the H14DSH, so verify the motherboard manual for the correct population sequence.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.