Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Eight green DDR5 RDIMM sticks with black chips, no heat spreaders, 288-pin server memory kit

NEMIX RAM

NEMIX RAM DDR5 5600 768GB 8x96GB ECC RDIMM CL46 1.1V Supermicro H14DST-FL memory upgrade

SKU CH-QGVV-3MSQ3

A 768 GB DDR5-5600 ECC registered RDIMM kit built for the Supermicro H14DST-FL motherboard, running at 1.1 V with CL46 latency

  • Capacity768GB (8 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 768GB 8X96GB

Visa 30 fler konfigurationer
  • 768 GB total capacity from eight 96 GB modules for high-density server workloads
  • DDR5-5600 speed with CL46 latency delivers rated throughput for the platform
  • 1 V operation matches the board's voltage requirement for stable full-population runs
  • Registered ECC architecture with 2Rx4 organisation offloads the controller and corrects single-bit errors
  • 288-pin RDIMM form factor verified for the Supermicro H14DST-FL motherboard

Exact-match DDR5-5600 kit for Supermicro H14DST-FL

This 768GB kit delivers eight 96GB DDR5-5600 registered ECC RDIMMs built to the precise rank, voltage and timing the H14DST-FL memory controller expects. It targets administrators who need maximum supported capacity in every slot without manual tuning.

Populates all eight slots

The 288-pin RDIMM form factor matches the board's required registered architecture, offloading the memory controller so a fully populated configuration runs at rated speed. No UDIMM or SODIMM alternatives will fit this platform.

Registered buffering and on-die ECC maintain

Operating at the specified 1.1V and CL46, the modules draw only the power the platform allocates per slot while correcting single-bit errors before they affect production workloads. No heat spreaders are included, so chassis airflow must meet the server manufacturer's thermal guidelines.

I korthet

  • 768 GB total capacity from eight 96 GB modules for high-density server workloads
  • DDR5-5600 speed with CL46 latency delivers rated throughput for the platform
  • 1 V operation matches the board's voltage requirement for stable full-population runs
  • Registered ECC architecture with 2Rx4 organisation offloads the controller and corrects single-bit errors
  • 288-pin RDIMM form factor verified for the Supermicro H14DST-FL motherboard

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K8
Capacity768GB (8 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 8X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Will the 1.1 V operating voltage stay stable when all eight 96 GB modules run continuously at DDR5-5600?

The kit is specified at 1.10 V and CL46 for DDR5-5600; registered ECC RDIMMs offload the memory controller so every slot can remain fully populated at rated speed without voltage drift.

How much heat and noise should I expect from a fully populated H14DST-FL running this 768 GB kit 24/7?

Modules have no heat spreader and draw 1.10 V at CL46; registered buffering reduces electrical load per DIMM, so thermal output stays low and no active cooling is added by the memory itself.

Does my Supermicro H14DST-FL need a specific BIOS revision or CPU stepping to recognise all 768 GB across the 288-pin RDIMM slots?

The kit is verified for the H14DST-FL motherboard; consult the board manual for approved DIMM population order and any BIOS version required for full 8 × 96 GB capacity.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.