Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Eight green DDR5 RDIMM sticks with black chips, no heat spreaders, 288-pin server memory kit

NEMIX RAM

NEMIX RAM DDR5 5600 768GB 8x96GB ECC RDIMM CL46 1.1V Supermicro H14DST-FL memory upgrade

SKU CH-QGVV-3MSQ3

A 768 GB DDR5-5600 ECC registered RDIMM kit built for the Supermicro H14DST-FL motherboard, running at 1.1 V with CL46 latency

  • Capacity768GB (8 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 768GB 8X96GB

Zobrazit dalších 30 konfigurací
  • 768 GB total capacity from eight 96 GB modules for high-density server workloads
  • DDR5-5600 speed with CL46 latency delivers rated throughput for the platform
  • 1 V operation matches the board's voltage requirement for stable full-population runs
  • Registered ECC architecture with 2Rx4 organisation offloads the controller and corrects single-bit errors
  • 288-pin RDIMM form factor verified for the Supermicro H14DST-FL motherboard

Exact-match DDR5-5600 kit for Supermicro H14DST-FL

This 768GB kit delivers eight 96GB DDR5-5600 registered ECC RDIMMs built to the precise rank, voltage and timing the H14DST-FL memory controller expects. It targets administrators who need maximum supported capacity in every slot without manual tuning.

Populates all eight slots

The 288-pin RDIMM form factor matches the board's required registered architecture, offloading the memory controller so a fully populated configuration runs at rated speed. No UDIMM or SODIMM alternatives will fit this platform.

Registered buffering and on-die ECC maintain

Operating at the specified 1.1V and CL46, the modules draw only the power the platform allocates per slot while correcting single-bit errors before they affect production workloads. No heat spreaders are included, so chassis airflow must meet the server manufacturer's thermal guidelines.

Přednosti

  • 768 GB total capacity from eight 96 GB modules for high-density server workloads
  • DDR5-5600 speed with CL46 latency delivers rated throughput for the platform
  • 1 V operation matches the board's voltage requirement for stable full-population runs
  • Registered ECC architecture with 2Rx4 organisation offloads the controller and corrects single-bit errors
  • 288-pin RDIMM form factor verified for the Supermicro H14DST-FL motherboard

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K8
Capacity768GB (8 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 8X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will the 1.1 V operating voltage stay stable when all eight 96 GB modules run continuously at DDR5-5600?

The kit is specified at 1.10 V and CL46 for DDR5-5600; registered ECC RDIMMs offload the memory controller so every slot can remain fully populated at rated speed without voltage drift.

How much heat and noise should I expect from a fully populated H14DST-FL running this 768 GB kit 24/7?

Modules have no heat spreader and draw 1.10 V at CL46; registered buffering reduces electrical load per DIMM, so thermal output stays low and no active cooling is added by the memory itself.

Does my Supermicro H14DST-FL need a specific BIOS revision or CPU stepping to recognise all 768 GB across the 288-pin RDIMM slots?

The kit is verified for the H14DST-FL motherboard; consult the board manual for approved DIMM population order and any BIOS version required for full 8 × 96 GB capacity.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.