Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Six bare green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 5600 ECC Registered RDIMM 576GB (6×96GB) CL46 1.1V 288-pin Supermicro H14DST-FL memory upgrade

SKU CH-BPHA-2M7N8

A 576GB kit of six 96GB DDR5 5600 ECC Registered RDIMM modules at CL46 and 1.1V, validated for the Supermicro H14DST-FL motherboard

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 576GB 6X96GB

Visa 30 fler konfigurationer
  • 576 GB total capacity from six 96 GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput on supported platforms
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors
  • 1 V operation matches the Supermicro H14DST-FL voltage requirement exactly
  • 288-pin RDIMM form factor fits the board's memory slots without adapters

576GB DDR5 5600 Registered ECC Kit

This kit provides 576GB of DDR5 5600 memory across six 96GB registered ECC RDIMMs. It is built for the Supermicro H14DST-FL motherboard and matches the board's required 288-pin RDIMM form factor, 2Rx4 rank structure, 1.1V operating voltage and CL46 latency. The modules use major OEM chips and are validated for full-capacity recognition at rated speed.

Suited For Fully Populated Servers

This memory suits administrators who need to fill every slot on a compatible Supermicro H14DST-FL system with registered ECC capacity. It is not for workstations or desktops that accept only unbuffered UDIMMs, nor for boards limited to lower maximum capacities or different DDR generations. Builders needing SODIMM or non-ECC modules should look elsewhere.

Capacity And Headroom

Six 96GB modules deliver 576GB total, allowing the server to run large virtualisation clusters, in-memory databases or heavy compute workloads across all populated channels. Registered buffering keeps the memory controller stable when every slot is occupied. Headroom ends at the board's maximum supported capacity and channel population limits; consult the motherboard manual for exact configuration rules.

I korthet

  • 576 GB total capacity from six 96 GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput on supported platforms
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors
  • 1 V operation matches the Supermicro H14DST-FL voltage requirement exactly
  • 288-pin RDIMM form factor fits the board's memory slots without adapters

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Does the Supermicro H14DST-FL motherboard need a specific CPU generation to recognise the 576GB DDR5 5600 kit?

The kit is validated for the H14DST-FL platform; consult the board manual for the exact processor families and BIOS versions that enable full 5600 MT/s operation across all six 96GB slots.

Can I mix these 2Rx4 Registered ECC RDIMMs with older single-rank or UDIMM modules on the same board?

Mixing ranks, voltages, or registered versus unbuffered types on the H14DST-FL is not supported — populate all six channels with identical 1.1V 2Rx4 RDIMMs for stable operation.

After installation, how do I confirm the system is running the full 576GB at DDR5 5600 CL46?

Enter the BIOS or use a hardware inventory tool; it should report 576GB total, DDR5 5600 MT/s, PC5-44800 data rate, CL46 latency, 1.10V, and ECC active on every DIMM.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.