Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Blue 92mm square CPU fan with black blades and three-pin connector

OEM Industries

OEM Industries DF0922512SEMN 92mm 3-pin CPU fan

SKU CH-D4DR-WF7WB

92 mm CPU fan with 12 V, 0.22 A draw and three-pin connector for standard motherboard headers

  • ColorBlue
  • TypeFan only
  • Fan Size92mm
  • Power Connector3 Pin
  • LEDNo
  • 92 mm frame fits tight CPU cooler spaces
  • 12 V / 0.22 A keeps power draw low at 2.64 W
  • Three-pin connector enables direct motherboard control
  • Eight symmetrical mounting holes simplify installation in either orientation
  • Blue fan-only design adds colour without LED distraction

OEM Industries DF0922512SEMN 92mm CPU fan

The OEM Industries DF0922512SEMN is a 92mm fan-only CPU cooler designed for systems that need a compact 12V cooling solution. It suits builders replacing a worn unit or assembling a low-profile tower where a 9cm footprint is required. The three-pin connector provides basic voltage control without PWM complexity. Buyers needing RGB illumination or a bundled heatsink should look elsewhere.

Thermals noise and power draw

Rated at 12V and 0.22A, the fan draws 2.64W during operation. The three-pin interface allows the motherboard to vary voltage for speed regulation, which directly affects airflow and acoustic output. No LED lighting is present, so the unit adds no visual distraction in darkened environments. Performance scales with the voltage curve set in BIOS or fan-control software.

Build quality and mounting implications

The blue plastic frame features eight symmetrical mounting holes, enabling flexible orientation on compatible heatsinks or chassis brackets. As a fan-only component, it assumes the installer already has a heatsink with matching 92mm hole spacing. The 3-wire cable supplies power, ground and a tachometer signal for RPM monitoring. No additional brackets or adapters are included in the package.

I korthet

  • 92 mm frame fits tight CPU cooler spaces
  • 12 V / 0.22 A keeps power draw low at 2.64 W
  • Three-pin connector enables direct motherboard control
  • Eight symmetrical mounting holes simplify installation in either orientation
  • Blue fan-only design adds colour without LED distraction

Specifikationer

ModelDF0922512SEMN
ColorBlue
TypeFan only
Fan Size92mm
Power Connector3 Pin
LEDNo

Frågor om den här produkten

How do I install the fan using the eight symmetrical mounting holes and which orientation step is often missed?

Align the fan so the four corner holes and the four mid-edge holes all match the heatsink brackets, then secure with screws; the step often missed is checking airflow direction — the label side should face the heatsink for intake or away for exhaust.

What maintenance will the sleeve-bearing motor need later?

The 12 V 0.22 A sleeve-bearing motor will eventually run dry; plan to clean dust from the blades every few months and replace the fan once bearing noise or RPM drop appears.

What limit appears first during continuous operation?

Under sustained load the 2.64 W motor hits its thermal ceiling first; the sleeve bearing lubricant degrades with heat, causing RPM to fall before any other component fails.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.