Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Blue 92mm square CPU fan with black blades and three-pin connector

OEM Industries

OEM Industries DF0922512SEMN 92mm 3-pin CPU fan

SKU CH-D4DR-WF7WB

92 mm CPU fan with 12 V, 0.22 A draw and three-pin connector for standard motherboard headers

  • ColorBlue
  • TypeFan only
  • Fan Size92mm
  • Power Connector3 Pin
  • LEDNo
  • 92 mm frame fits tight CPU cooler spaces
  • 12 V / 0.22 A keeps power draw low at 2.64 W
  • Three-pin connector enables direct motherboard control
  • Eight symmetrical mounting holes simplify installation in either orientation
  • Blue fan-only design adds colour without LED distraction

OEM Industries DF0922512SEMN 92mm CPU fan

The OEM Industries DF0922512SEMN is a 92mm fan-only CPU cooler designed for systems that need a compact 12V cooling solution. It suits builders replacing a worn unit or assembling a low-profile tower where a 9cm footprint is required. The three-pin connector provides basic voltage control without PWM complexity. Buyers needing RGB illumination or a bundled heatsink should look elsewhere.

Thermals noise and power draw

Rated at 12V and 0.22A, the fan draws 2.64W during operation. The three-pin interface allows the motherboard to vary voltage for speed regulation, which directly affects airflow and acoustic output. No LED lighting is present, so the unit adds no visual distraction in darkened environments. Performance scales with the voltage curve set in BIOS or fan-control software.

Build quality and mounting implications

The blue plastic frame features eight symmetrical mounting holes, enabling flexible orientation on compatible heatsinks or chassis brackets. As a fan-only component, it assumes the installer already has a heatsink with matching 92mm hole spacing. The 3-wire cable supplies power, ground and a tachometer signal for RPM monitoring. No additional brackets or adapters are included in the package.

Points forts

  • 92 mm frame fits tight CPU cooler spaces
  • 12 V / 0.22 A keeps power draw low at 2.64 W
  • Three-pin connector enables direct motherboard control
  • Eight symmetrical mounting holes simplify installation in either orientation
  • Blue fan-only design adds colour without LED distraction

Caractéristiques

ModelDF0922512SEMN
ColorBlue
TypeFan only
Fan Size92mm
Power Connector3 Pin
LEDNo

Questions sur cet article

How do I install the fan using the eight symmetrical mounting holes and which orientation step is often missed?

Align the fan so the four corner holes and the four mid-edge holes all match the heatsink brackets, then secure with screws; the step often missed is checking airflow direction — the label side should face the heatsink for intake or away for exhaust.

What maintenance will the sleeve-bearing motor need later?

The 12 V 0.22 A sleeve-bearing motor will eventually run dry; plan to clean dust from the blades every few months and replace the fan once bearing noise or RPM drop appears.

What limit appears first during continuous operation?

Under sustained load the 2.64 W motor hits its thermal ceiling first; the sleeve bearing lubricant degrades with heat, causing RPM to fall before any other component fails.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.