Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Small black 50mm Maglev fan with three power wires

OEM Industries

OEM Industries ME50151V3-D030-G99 50mm Maglev Fan

SKU CH-NKBE-ZYEEB

A 50 mm maglev fan delivering 3500 to 3999 rpm airflow at 10 to 15 dBA noise

  • ColorBlack
  • TypeFan only
  • Fan Size50mm
  • Bearing TypeMaglev
  • Power Connector3 Pin
  • LEDNo
  • Maglev bearing reduces friction for longer life
  • 3500–3999 RPM delivers 10–15 CFM airflow
  • Low 10–15 dBA noise keeps systems quiet
  • 3-pin 12 V connector fits standard headers
  • Compact 50 mm frame suits tight cases

50mm Maglev Case Fan

The OEM Industries ME50151V3-D030-G99 is a 50mm fan built with a magnetic-levitation bearing for quiet, low-vibration operation. It targets builders refreshing compact chassis or small-form-factor coolers that accept a 50mm frame and a three-pin power connector.

Airflow Range 10 to 15 CFM

At 3500 to 3999 rpm the fan moves between 10 and 15 cubic feet per minute, enough for targeted spot-cooling on voltage regulators, chipset heatsinks or tight drive bays. It runs out of steam when asked to cool a full-size CPU tower or exhaust a high-wattage graphics card.

Noise Floor 10 to 15 dBA

The magnetic bearing keeps acoustic output between 10 and 15 dBA across the speed range, making it suitable for noise-sensitive builds. Buyers who need higher static pressure or PWM speed control should look elsewhere.

I korthet

  • Maglev bearing reduces friction for longer life
  • 3500–3999 RPM delivers 10–15 CFM airflow
  • Low 10–15 dBA noise keeps systems quiet
  • 3-pin 12 V connector fits standard headers
  • Compact 50 mm frame suits tight cases

Specifikationer

ModelME50151V3-D030-G99
ColorBlack
TypeFan only
Fan Size50mm
Bearing TypeMaglev
Power Connector3 Pin
LEDNo

Frågor om den här produkten

Will the 3-pin power connector on this 50mm maglev fan work with the 4-pin headers on my older motherboard?

The fan uses a standard 3-pin connector that fits 4-pin motherboard headers; it will run at full speed because the PWM pin is absent.

How can I confirm the fan is running within its 3500 to 3999 rpm range once installed?

Check the RPM reading in BIOS or a hardware monitoring utility; it should report a value between 3500 and 3999 rpm under load.

Does the package include mounting screws or do I need to buy them separately for a 50mm case mount?

The product is listed as fan only; mounting screws are not included and must be sourced separately.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.