We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black 50mm Maglev fan with three power wires

OEM Industries

OEM Industries ME50151V3-D030-G99 50mm Maglev Fan

SKU CH-NKBE-ZYEEB

A 50 mm maglev fan delivering 3500 to 3999 rpm airflow at 10 to 15 dBA noise

  • ColorBlack
  • TypeFan only
  • Fan Size50mm
  • Bearing TypeMaglev
  • Power Connector3 Pin
  • LEDNo
  • Maglev bearing reduces friction for longer life
  • 3500–3999 RPM delivers 10–15 CFM airflow
  • Low 10–15 dBA noise keeps systems quiet
  • 3-pin 12 V connector fits standard headers
  • Compact 50 mm frame suits tight cases

50mm Maglev Case Fan

The OEM Industries ME50151V3-D030-G99 is a 50mm fan built with a magnetic-levitation bearing for quiet, low-vibration operation. It targets builders refreshing compact chassis or small-form-factor coolers that accept a 50mm frame and a three-pin power connector.

Airflow Range 10 to 15 CFM

At 3500 to 3999 rpm the fan moves between 10 and 15 cubic feet per minute, enough for targeted spot-cooling on voltage regulators, chipset heatsinks or tight drive bays. It runs out of steam when asked to cool a full-size CPU tower or exhaust a high-wattage graphics card.

Noise Floor 10 to 15 dBA

The magnetic bearing keeps acoustic output between 10 and 15 dBA across the speed range, making it suitable for noise-sensitive builds. Buyers who need higher static pressure or PWM speed control should look elsewhere.

Highlights

  • Maglev bearing reduces friction for longer life
  • 3500–3999 RPM delivers 10–15 CFM airflow
  • Low 10–15 dBA noise keeps systems quiet
  • 3-pin 12 V connector fits standard headers
  • Compact 50 mm frame suits tight cases

Specifications

ModelME50151V3-D030-G99
ColorBlack
TypeFan only
Fan Size50mm
Bearing TypeMaglev
Power Connector3 Pin
LEDNo

Questions about this item

Will the 3-pin power connector on this 50mm maglev fan work with the 4-pin headers on my older motherboard?

The fan uses a standard 3-pin connector that fits 4-pin motherboard headers; it will run at full speed because the PWM pin is absent.

How can I confirm the fan is running within its 3500 to 3999 rpm range once installed?

Check the RPM reading in BIOS or a hardware monitoring utility; it should report a value between 3500 and 3999 rpm under load.

Does the package include mounting screws or do I need to buy them separately for a 50mm case mount?

The product is listed as fan only; mounting screws are not included and must be sourced separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.