Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green rectangular DDR5 RDIMM module with black chips and gold contacts, no heat spreader

OWC

OWC 64GB DDR5 5600 CL46 2Rx4 1.1V ECC RDIMM SuperBlade

SKU CH-JBN8-V884X

A 64GB DDR5 5600 ECC registered RDIMM with CL46 latency and 1.1V operation, validated for Supermicro SuperBlade SBI-621E servers

  • Capacity64GB
  • Type288-Pin DDR5 ECC RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS Latency46
  • Voltage1.1V
  • ECCYes

Capacity 64GB

  • 64GB
  • 128GB

Genomstrukna varianter finns, men är inte i lager här.

  • 64GB capacity expands server memory headroom
  • DDR5 5600 speed delivers high data throughput
  • CL46 latency supports responsive workloads
  • ECC registered design protects data integrity
  • 1V operation reduces power consumption

Targeted Server Upgrade

This 64GB DDR5 5600 module is built for Supermicro SuperBlade SBI-621E-1T3N and SBI-621E-5T3N systems. It delivers ECC registered performance for workstations, servers and network switches that require registered memory. The single DIMM adds capacity without mixing buffered and unbuffered types.

Registered 288-Pin Build

The module uses a 288-pin RDIMM form factor with 2Rx4 organisation and runs at 1.1V. No heat spreader is fitted, so airflow in dense blade chassis passes directly over the components. JEDEC and RoHS compliance ensures the electrical and mechanical interface matches the SuperBlade slots exactly.

Verify Blade Compatibility

Confirm the target chassis is a SuperBlade SBI-621E-1T3N or SBI-621E-5T3N before ordering. This memory will not work in standard desktop platforms or systems that require unbuffered or load-reduced DIMMs. Check the motherboard documentation for maximum supported capacity per slot and population rules.

I korthet

  • 64GB capacity expands server memory headroom
  • DDR5 5600 speed delivers high data throughput
  • CL46 latency supports responsive workloads
  • ECC registered design protects data integrity
  • 1V operation reduces power consumption

Specifikationer

BrandOWC
Part Number5R6D52R464GB
Capacity64GB
Type288-Pin DDR5 ECC RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS Latency46
Voltage1.1V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperBlade SBI-621E-1T3N
Supermicro SuperBlade SBI-621E-5T3N

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

What DDR5 speed and CAS latency does this 64GB module run at?

It operates at DDR5 5600 (PC5-44800) with a CAS latency of 46.

Which physical slot and pin count does this ECC RDIMM require?

It fits a standard 288-pin DDR5 RDIMM socket in the Supermicro SuperBlade SBI-621E-1T3N or SBI-621E-5T3N chassis.

How is this registered ECC DIMM installed, and what common mistake should I avoid?

Power down the blade, open the DIMM ejectors, align the notch, press firmly until both latches click, then verify the module is seated evenly; never mix this registered ECC module with unbuffered or load-reduced memory.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.