OWC 64GB DDR5 5600 ECC Registered RDIMM 2Rx4 CL46 1.1V 288-pin memory upgrade
- 64GB
- 288-Pin DDR5 ECC RD…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
A 64GB DDR5 5600 ECC registered RDIMM with CL46 latency and 1.1V operation, validated for Supermicro SuperBlade SBI-621E servers
Capacity 64GB
This 64GB DDR5 5600 module is built for Supermicro SuperBlade SBI-621E-1T3N and SBI-621E-5T3N systems. It delivers ECC registered performance for workstations, servers and network switches that require registered memory. The single DIMM adds capacity without mixing buffered and unbuffered types.
The module uses a 288-pin RDIMM form factor with 2Rx4 organisation and runs at 1.1V. No heat spreader is fitted, so airflow in dense blade chassis passes directly over the components. JEDEC and RoHS compliance ensures the electrical and mechanical interface matches the SuperBlade slots exactly.
Confirm the target chassis is a SuperBlade SBI-621E-1T3N or SBI-621E-5T3N before ordering. This memory will not work in standard desktop platforms or systems that require unbuffered or load-reduced DIMMs. Check the motherboard documentation for maximum supported capacity per slot and population rules.
| Brand | OWC |
|---|---|
| Part Number | 5R6D52R464GB |
| Capacity | 64GB |
| Type | 288-Pin DDR5 ECC RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | 46 |
| Voltage | 1.1V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro SuperBlade SBI-621E-1T3N Supermicro SuperBlade SBI-621E-5T3N |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
It operates at DDR5 5600 (PC5-44800) with a CAS latency of 46.
It fits a standard 288-pin DDR5 RDIMM socket in the Supermicro SuperBlade SBI-621E-1T3N or SBI-621E-5T3N chassis.
Power down the blade, open the DIMM ejectors, align the notch, press firmly until both latches click, then verify the module is seated evenly; never mix this registered ECC module with unbuffered or load-reduced memory.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟