Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green printed circuit board with gold edge connectors and black memory chips no heat spreader

OWC

OWC 64GB DDR5 5600 CL46 2Rx4 ECC RDIMM Supermicro X13DEI-T X13DEM X13DET-B X13DGU X13DSF-A Memory Upgrade

SKU CH-YM4Z-WR59E

A 64GB DDR5 5600 CL46 ECC registered RDIMM for Supermicro X13DEI-T, X13DEM, X13DET-B, X13DGU and X13DSF-A motherboards

  • Capacity64GB
  • Type288-Pin DDR5 ECC RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS Latency46
  • Voltage1.1V
  • ECCYes

Capacity 64GB

  • 64 GB capacity lets you run larger workloads on supported Supermicro boards
  • DDR5 5600 speed with CL46 latency delivers high bandwidth for server tasks
  • ECC registered design detects and corrects data errors for reliable operation
  • 1 V low voltage reduces power draw in dense memory configurations
  • Single 2Rx4 288-pin module simplifies upgrades without mixing ranks

OWC 64GB DDR5 5600 ECC RDIMM

This OWC memory module delivers 64GB of DDR5 5600 capacity in a single 288-pin ECC Registered DIMM. It is validated for Supermicro X13DEI-T, X13DEM, X13DET-B, X13DGU and X13DSF-A motherboards. The module targets servers and workstations that require registered ECC memory for data integrity. It will not function in standard desktop platforms or alongside unbuffered or load-reduced DIMMs.

Thermals noise and power

Operating at the JEDEC-standard 1.1V, the module draws minimal power for its density and speed rating. No heat spreader is fitted, so airflow across the PCB manages thermals in typical server chassis. The registered buffer reduces electrical loading on the memory controller, contributing to stable operation under sustained workloads. Silent solid-state construction adds no acoustic noise to the system.

Build integration and constraints

The 2Rx4 dual-rank organisation maximises capacity per slot, freeing additional DIMM positions for future expansion. Installation requires a 288-pin DDR5 RDIMM slot with registered ECC support on the listed Supermicro platforms. Mixing with unbuffered or load-reduced modules is not supported. The single-module kit allows precise population to match channel requirements without purchasing unnecessary pairs.

I korthet

  • 64 GB capacity lets you run larger workloads on supported Supermicro boards
  • DDR5 5600 speed with CL46 latency delivers high bandwidth for server tasks
  • ECC registered design detects and corrects data errors for reliable operation
  • 1 V low voltage reduces power draw in dense memory configurations
  • Single 2Rx4 288-pin module simplifies upgrades without mixing ranks

Specifikationer

BrandOWC
Part Number5R6D52R464GB
Capacity64GB
Type288-Pin DDR5 ECC RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS Latency46
Voltage1.1V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X13DEI-T
Supermicro Motherboard X13DEM
Supermicro Motherboard X13DET-B
Supermicro Motherboard X13DGU
Supermicro Motherboard X13DSF-A

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How do I install this 288-pin DDR5 RDIMM in my Supermicro X13DEI-T, and what step do people often miss?

Power down the server, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until both retention clips click, then enable ECC in the BIOS — skipping the BIOS step leaves error correction inactive.

What maintenance or replacement will this 64GB 2Rx4 ECC registered module need over its service life?

No scheduled maintenance is required; the module either continues operating or develops uncorrectable errors that the OS logs, at which point the single 64GB DIMM is replaced as a unit.

What limit appears first when this CL46 1.1V DDR5 5600 RDIMM runs sustained workloads on a Supermicro X13DGU?

The CAS latency of 46 cycles at 5600 MT/s sets the baseline response time; under continuous load the memory controller hits that timing ceiling before thermal or voltage limits become a factor.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.