Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green rectangular circuit board with gold edge connectors and black memory chips, no heat spreader

OWC

OWC 8GB DDR4 2666MHz CL19 1.2V 288-Pin UDIMM Dell OptiPlex 3060 3070 5060

SKU CH-TN28-DFXDS

8GB DDR4 2666MHz CL19 UDIMM for Dell OptiPlex 3060, 3070 and 5060 desktops

  • Capacity8GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCNo
  • Boosts PC responsiveness with 8GB DDR4 2666MHz memory
  • JEDEC compliant 1.2V CL19 module ensures stable operation
  • Designed for Dell OptiPlex 3060 3070 5060 systems
  • Backward compatible with 2133MHz and 2400MHz platforms
  • Easy DIY upgrade installs in minutes without tools

Dell OptiPlex 3060 3070 5060 DDR4 Upgrade

This 8GB DDR4 2666MHz CL19 UDIMM is built for Dell OptiPlex 3060 SFF, 3060 Tower, 3070 SFF, 3070 Tower and 5060 SFF desktops. It suits users who need a straightforward capacity increase for daily multitasking on these specific platforms. The module runs at 1.2V and uses a 288-pin unbuffered non-ECC design.

JEDEC Compliant Standard Module

The stick meets JEDEC PC4-21300 specifications and is ROHS compliant, ensuring a warranty-safe upgrade without configuration changes. It installs as a standard DIMM with no heat spreader, extra software or proprietary tools required. Backward compatibility with 2133MHz and 2400MHz systems allows it to downclock automatically when installed in slower slots.

DDR4 2666MHz Interface Limits

The DDR4 2666MHz interface caps bandwidth at the PC4-21300 rate, so workloads needing higher throughput will not benefit from faster memory. CL19 latency is fixed by the JEDEC standard and cannot be tightened on these OptiPlex platforms. Systems limited to 2133MHz or 2400MHz will run this module at the lower speed. Builders needing ECC error correction or registered signal buffering must choose a different module type.

I korthet

  • Boosts PC responsiveness with 8GB DDR4 2666MHz memory
  • JEDEC compliant 1.2V CL19 module ensures stable operation
  • Designed for Dell OptiPlex 3060 3070 5060 systems
  • Backward compatible with 2133MHz and 2400MHz platforms
  • Easy DIY upgrade installs in minutes without tools

Specifikationer

BrandOWC
Part Number2U6D41R808GB
Capacity8GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemDell OptiPlex 3060 SFF
Dell OptiPlex 3060 Tower
Dell OptiPlex 3070 SFF
Dell OptiPlex 3070 Tower
Dell OptiPlex 5060 SFF

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Will the 1Rx8 single-rank design need any special handling when I add more sticks later?

The module is a standard 1Rx8 DDR4 UDIMM; just match speed and voltage when expanding and the system will recognise it automatically.

Does the CL19 latency at 2666 MHz become a bottleneck during long rendering sessions?

CL19 at 2666 MHz is the rated timing; sustained workloads run at this latency unless the platform downclocks to 2400 MHz or 2133 MHz.

How warm does the bare 288-pin UDIMM get when the OptiPlex runs all day?

Without a heat spreader the stick relies on case airflow; at 1.2 V typical DDR4 thermals stay well within JEDEC limits in a ventilated chassis.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.