Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Rectangular E3.S 7.5mm SSD with green circuit board and gold edge connector

Solidigm

Solidigm D5-P5430 3.84TB E3.S 7.5mm enterprise SSD SBFPFABU038T001

SKU CH-MJX2-V64F2 MPN SBFPFABU038T001

Enterprise SSD with 3.84 TB of 192-layer QLC NAND in an E3.S 7.5 mm form factor using PCIe 4.0 x4

  • Form FactorE3.S 7.5mm
  • Capacity3.84TB
  • Memory Components192L QLC 3D NAND
  • InterfacePCI-Express 4.0
  • MTBF2,000,000 hours
  • Operating Temperature0°C ~ +70°C

Option 3.84TB E3.S

Visa 14 fler konfigurationer
  • High-density 3.84 TB capacity fits read-intensive workloads
  • E3.S 7.5 mm form factor enables dense server chassis designs
  • PCI-Express 4.0 x4 interface delivers high-throughput data transfer
  • 192-layer QLC 3D NAND provides cost-efficient flash storage
  • 2 000 000 hours MTBF supports continuous data-centre operation

E3.S 7.5mm form factor

The Solidigm D5-P5430 is a 3.84TB enterprise SSD built for dense server deployments. Its E3.S 7.5mm form factor fits hot-plug bays designed for high-capacity flash storage. The drive targets data-centre operators who need read-intensive endurance in a compact package.

3.84TB QLC capacity and endurance

192L QLC 3D NAND provides 3.84TB of storage for read-heavy workloads such as content delivery and analytics. Sequential throughput scales with PCIe 4.0 x4, while sustained random writes will saturate sooner than TLC alternatives. The 2,000,000-hour MTBF rating reflects confidence in typical read-dominant duty cycles.

PCIe 4.0 x4 interface requirement

This drive requires a PCIe 4.0 x4 electrical connection in an E3.S backplane to deliver rated performance. Systems limited to PCIe 3.0 or x2 lane widths will constrain bandwidth and may not support hot-plug management features. Verify backplane and controller compatibility before deployment.

I korthet

  • High-density 3.84 TB capacity fits read-intensive workloads
  • E3.S 7.5 mm form factor enables dense server chassis designs
  • PCI-Express 4.0 x4 interface delivers high-throughput data transfer
  • 192-layer QLC 3D NAND provides cost-efficient flash storage
  • 2 000 000 hours MTBF supports continuous data-centre operation

Specifikationer

BrandSolidigm
SeriesD5-P5430
ModelD5-P5430
Form FactorE3.S 7.5mm
Capacity3.84TB
Memory Components192L QLC 3D NAND
InterfacePCI-Express 4.0
MTBF2,000,000 hours
Operating Temperature0°C ~ +70°C
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Fraktvikt2.80 kg
Paketstorlek339 × 201 × 134 mm

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Will the PCIe 4.0 x4 E3.S 7.5mm drive work in a server backplane that only has PCIe 3.0 slots?

The drive uses PCI-Express 4.0 x4; it will operate in a PCIe 3.0 slot at PCIe 3.0 speeds because the interface is backward compatible.

How can I verify the 192L QLC 3D NAND SSD is healthy after installation?

Check the drive SMART data for media wear indicator, temperature within 0°C to +70°C, and confirm the firmware reports 3.84TB capacity.

Does the single-pack E3.S 7.5mm unit include a heatsink or mounting screws, or must I buy them separately?

The single pack contains only the SSD; E3.S heatsinks and retention screws are supplied by the server chassis vendor and must be sourced separately.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.