Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Black 80mm square case fan with 3-pin connector

SXDOOL

SXDOOL Antec Fighting Tiger A20 80mm 2000RPM 3-pin case fan

SKU CH-JYJN-WVJP3

An 80mm 3-pin case fan spinning at 2000RPM delivers 36CFM airflow under 25dBA

  • TypeCase Fan
  • Fan Size80mm
  • RPM2000RPM±10%
  • Air Flow36CFM
  • Noise Level<25dba
  • Power Connector3 Pin
  • 80mm frame fits tight chassis spaces
  • 2000RPM±10% delivers 36CFM airflow
  • Under 25dBA keeps operation quiet
  • 3-pin 12VDC connector powers the fan
  • Black finish with no LED lighting

80mm Case Fan for Compact Builds

The Antec Fighting Tiger A20 is an 80mm case fan designed for 12V DC operation. It fits standard 80 x 80 x 25mm mounting points found in small form factor cases and legacy chassis. The three pin power connector supplies voltage and a tachometer signal to the motherboard header. Black blades and frame keep the appearance neutral inside any build.

Suits Tight Spaces Not High Static Pressure

This fan suits builders who need basic airflow in restricted 80mm mounts such as HTPC cases or older server enclosures. The 36CFM rating at 2000RPM delivers modest air movement for low heat loads. Buyers who need high static pressure for dense radiators or restrictive filters should look elsewhere. The sleeve bearing design also limits suitability for continuous horizontal mounting orientations.

36CFM Airflow at Sub 25dBA Noise

The single specification that decides fit is the 36CFM airflow rating paired with a noise level below 25dBA. This balance determines whether the fan can cool your specific components quietly enough. Verify that your chassis has 80mm mounting holes and a three pin header before purchase. The fixed 2000RPM speed offers no PWM control for automatic speed scaling.

I korthet

  • 80mm frame fits tight chassis spaces
  • 2000RPM±10% delivers 36CFM airflow
  • Under 25dBA keeps operation quiet
  • 3-pin 12VDC connector powers the fan
  • Black finish with no LED lighting

Specifikationer

TypeCase Fan
Fan Size80mm
RPM2000RPM±10%
Air Flow36CFM
Noise Level<25dba
Power Connector3 Pin
ColorBlack
LEDNo

Frågor om den här produkten

How can I confirm the fan is spinning at the rated 2000 RPM after installation?

Use BIOS hardware monitor or software like HWMonitor to verify the 3-pin header reports a speed near 2000 RPM with a tolerance of ±10%.

What comes in the box and do I need any extra cables or screws for mounting?

The package includes the 80 x 80 x 25 mm fan with a 3-pin 12 V connector; mounting screws are typically supplied but a 3-pin to 4-pin adapter must be bought separately if your board only has 4-pin headers.

Which version should I choose if my case only accepts 80 mm fans and I want the quietest option listed?

This single Fighting Tiger A20 model runs at 2000 RPM and produces less than 25 dBA, making it the only 80 mm variant offered in this series.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.