Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black 80mm square case fan with 3-pin connector

SXDOOL

SXDOOL Antec Fighting Tiger A20 80mm 2000RPM 3-pin case fan

SKU CH-JYJN-WVJP3

An 80mm 3-pin case fan spinning at 2000RPM delivers 36CFM airflow under 25dBA

  • TypeCase Fan
  • Fan Size80mm
  • RPM2000RPM±10%
  • Air Flow36CFM
  • Noise Level<25dba
  • Power Connector3 Pin
  • 80mm frame fits tight chassis spaces
  • 2000RPM±10% delivers 36CFM airflow
  • Under 25dBA keeps operation quiet
  • 3-pin 12VDC connector powers the fan
  • Black finish with no LED lighting

80mm Case Fan for Compact Builds

The Antec Fighting Tiger A20 is an 80mm case fan designed for 12V DC operation. It fits standard 80 x 80 x 25mm mounting points found in small form factor cases and legacy chassis. The three pin power connector supplies voltage and a tachometer signal to the motherboard header. Black blades and frame keep the appearance neutral inside any build.

Suits Tight Spaces Not High Static Pressure

This fan suits builders who need basic airflow in restricted 80mm mounts such as HTPC cases or older server enclosures. The 36CFM rating at 2000RPM delivers modest air movement for low heat loads. Buyers who need high static pressure for dense radiators or restrictive filters should look elsewhere. The sleeve bearing design also limits suitability for continuous horizontal mounting orientations.

36CFM Airflow at Sub 25dBA Noise

The single specification that decides fit is the 36CFM airflow rating paired with a noise level below 25dBA. This balance determines whether the fan can cool your specific components quietly enough. Verify that your chassis has 80mm mounting holes and a three pin header before purchase. The fixed 2000RPM speed offers no PWM control for automatic speed scaling.

Přednosti

  • 80mm frame fits tight chassis spaces
  • 2000RPM±10% delivers 36CFM airflow
  • Under 25dBA keeps operation quiet
  • 3-pin 12VDC connector powers the fan
  • Black finish with no LED lighting

Specifikace

TypeCase Fan
Fan Size80mm
RPM2000RPM±10%
Air Flow36CFM
Noise Level<25dba
Power Connector3 Pin
ColorBlack
LEDNo

Otázky k tomuto produktu

How can I confirm the fan is spinning at the rated 2000 RPM after installation?

Use BIOS hardware monitor or software like HWMonitor to verify the 3-pin header reports a speed near 2000 RPM with a tolerance of ±10%.

What comes in the box and do I need any extra cables or screws for mounting?

The package includes the 80 x 80 x 25 mm fan with a 3-pin 12 V connector; mounting screws are typically supplied but a 3-pin to 4-pin adapter must be bought separately if your board only has 4-pin headers.

Which version should I choose if my case only accepts 80 mm fans and I want the quietest option listed?

This single Fighting Tiger A20 model runs at 2000 RPM and produces less than 25 dBA, making it the only 80 mm variant offered in this series.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.