Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Black 1U rackmount NAS with four front drive bays and rear dual power supplies

Synology Inc.

Synology RS826RP+ AMD Ryzen V1500B 4-Bay rackmount NAS 16GB 80TB 10GbE

SKU CH-ZD08-WWN75

A 1U rackmount NAS with four drive bays, 16 GB DDR4 memory, an AMD Ryzen V1500B processor, dual 10GbE ports and 80 TB of pre-installed Synology Plus drives, fully assembled and tested

  • Port RJ-454 x 10/100/1000M 2 x 10GbE 10GBASE-T
  • Port USB2 x USB 3.2 Gen 1 Ports
  • Form Factor4-Bay
  • ProcessorAMD Ryzen
  • Installed Memory16GB
  • Included HDD Capacity80TB (4 x 20TB)
  • 16 GB DDR4 memory accelerates multitasking workloads
  • AMD Ryzen V1500B quad-core processor delivers 2.2 GHz performance
  • Four 20 TB Synology Plus drives provide 80 TB raw capacity
  • Dual 10GbE 10GBASE-T ports enable high-speed networking
  • Four 1 GbE RJ-45 ports support link aggregation failover

Compact 1U rackmount NAS for edge workloads

The Synology RS826RP+ is a 1U rackmount NAS built for edge deployments and branch offices. A quad-core AMD Ryzen V1500B processor at 2.2 GHz drives sequential reads over 2000 MB/s and writes over 1300 MB/s. It arrives fully assembled with 16 GB DDR4 RAM and four 20 TB Synology Plus drives for 80 TB raw capacity.

Operating range and redundant power

The unit operates from 0 °C to 35 °C at 5 % to 95 % relative humidity. Dual redundant power supplies accept 100–240 VAC at 50/60 Hz for continuous uptime. Four integrated 1 GbE RJ-45 ports support link aggregation and automatic failover, while the installed two-port 10GBASE-T adapter adds high-speed connectivity.

Four hot-swap bays with expansion path

Four hot-swappable bays accept 3.5-inch SATA hard drives or 2.5-inch SATA SSDs. A single RX426 expansion unit can be attached to double the bay count to eight and raise raw capacity to 192 TB with supported 24 TB drives. One PCIe Gen3 slot remains open for an additional network adapter or M.2 SSD adapter. Two USB 3.2 Gen 1 ports provide direct peripheral attachment.

I korthet

  • 16 GB DDR4 memory accelerates multitasking workloads
  • AMD Ryzen V1500B quad-core processor delivers 2.2 GHz performance
  • Four 20 TB Synology Plus drives provide 80 TB raw capacity
  • Dual 10GbE 10GBASE-T ports enable high-speed networking
  • Four 1 GbE RJ-45 ports support link aggregation failover

Specifikationer

BrandSynology
ModelRS826RP+
Port RJ-454 x 10/100/1000M
2 x 10GbE 10GBASE-T
Port USB2 x USB 3.2 Gen 1 Ports
Form Factor4-Bay
ProcessorAMD Ryzen
Installed Memory16GB
Included HDD Capacity80TB (4 x 20TB)
ManagementWeb-Based, DHCP Client
LEDsPower, HDD (Hard Disk Drive), LAN (10/100)
Power100-240 VAC 50/60Hz
Temperature0°C - 35 °C
Humidity5-95% R.H
Dimensions44 mm × 480 mm × 492.6 mm
Weight8.0 kg
Package ContentsMain Unit × 1
Accessory Pack × 1
AC Power Cord × 1
All Configuration Items

Frågor om den här produkten

How do I install the Synology 2-Port 10GbE Adapter into the RS826RP+ PCIe Gen3 slot, and which step do people often miss?

Power off the unit, remove the chassis cover, insert the adapter firmly into the PCIe Gen3 slot, secure the bracket screw, replace the cover, power on, then enable the ports in DSM Control Panel — the step most often missed is enabling the adapter in DSM after the physical install.

What drive maintenance or replacement will the four 20TB Synology Plus NAS drives need later?

The four 3.5-inch SATA drives are hot-swappable; monitor SMART health in DSM and replace any drive that shows reallocated sectors or SMART warnings — the system supports RAID rebuild with a compatible 3.5-inch SATA drive of equal or larger capacity.

What thermal limit appears first when the RS826RP+ runs sustained workloads at the top of its operating range?

The specified operating temperature tops out at 35 °C; sustained heavy I/O at or above that ambient temperature will trigger thermal throttling or protective shutdown before any other component limit is reached.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.