Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Black standalone SATA duplicator with LCD screen and three drive slots

Systor

Systor 1:3 SATA Duplicator & Sanitizer 5.4GB/min 128MB (SYS103HS-DP)

SKU CH-J1D2-5JT7M

Standalone duplicator copies or sanitises up to three 2.5 or 3.5 SATA drives at 5.4 GB/min with 128 MB buffer and DoD 5220.22-M erase

  • TypeHard Drive Duplicator
  • Target1 to 3
  • Buffer Memory128 MB
  • Data Transfer Rate5.4GB/min (90MB/sec)
  • Language SupportEnglish / Spanish / French / Japanese
  • DisplayLCD Screen

TARGET SIZE 1 to 03

DATA TRANSFER RATE 5.4GB/min [90MB/sec]

  • Copies up to three drives simultaneously with 1:3 target configuration
  • 128 MB buffer enables sustained 90 MB/s transfer rate
  • DoD 5220.22-M compliant sanitisation removes all data traces
  • Standalone LCD operation requires no host computer or software
  • Accepts 2.5" and 3.5" SATA drives without adapters

Standalone SATA Duplicator & Sanitizer

This unit copies and erases SATA drives without a host computer. It handles 2.5 and 3.5 inch drives natively, with no adapters required. The 128 MB buffer supports sustained transfers while the LCD screen guides menu selection. Operation runs from 115 or 230 V mains power.

SATA Interface Speed Limit

The duplicator tops out at 5.4 GB per minute, or 90 MB per second, across the SATA link. Source and target drives must share the SATA connector type; other interfaces are not supported. Copy throughput cannot exceed this ceiling regardless of drive capability. The 128 MB buffer smooths bursts but does not raise the peak rate.

Three-Target Capacity Headroom

One source drive feeds up to three targets simultaneously in a single session. The 250 W supply and per-port cooling fans sustain long runs across all bays. Whole-media mode copies every sector, while systems-and-files mode copies only used space for speed. DoD 5220.22-M erase meets strict sanitisation needs but adds time per pass.

I korthet

  • Copies up to three drives simultaneously with 1:3 target configuration
  • 128 MB buffer enables sustained 90 MB/s transfer rate
  • DoD 5220.22-M compliant sanitisation removes all data traces
  • Standalone LCD operation requires no host computer or software
  • Accepts 2.5" and 3.5" SATA drives without adapters

Specifikationer

BrandSystor
Model718122686162
TypeHard Drive Duplicator
Target1 to 3
Buffer Memory128 MB
Data Transfer Rate5.4GB/min (90MB/sec)
Language SupportEnglish / Spanish / French / Japanese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 250 W
Package Contentssee pictures for details

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Should I choose the 1-to-3 target model or a different capacity for my duplication needs?

This duplicator copies one source drive to up to three targets simultaneously, so select it when you need three clones per run.

What does the 5.4 GB per minute transfer rate mean when I am actually cloning drives?

It delivers up to 90 MB per second, letting you duplicate or sanitise large SATA HDDs and SSDs in a single standalone session.

Which SATA standard does the duplicator use and what speed ceiling does that impose?

The unit uses a SATA connector with a practical throughput capped at 90 MB per second for both copy and erase operations.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.