Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

Systor

Systor SYS1011HS-DP 1-to-11 SATA Duplicator 90MB/s Dual Port Hot Swap

SKU CH-0739-WSJH6

Duplicates up to 11 SATA drives simultaneously at 90MB/s with hot-swap bays and DoD 5220.22-M sanitisation

  • TypeHard Drive Duplicator
  • Target1 to 11
  • Buffer Memory128 MB
  • Data Transfer Rate5.4GB/min (90MB/sec)
  • Language SupportEnglish / Spanish / French / Japanese
  • DisplayLCD Screen

DATA TRANSFER RATE 5.4GB/min [90MB/sec]

  • Copies 11 drives simultaneously with 90 MB/s throughput
  • Standalone operation requires no host computer or software
  • Dual-port hot-swap bays accept 2.5" and 3.5" drives directly
  • DoD 5220.22-M compliant sanitisation erases data securely
  • 128 MB buffer and LCD menu simplify copy and erase tasks

Standalone 1-to-11 SATA duplicator

The Systor SYS1011HS-DP copies one source drive to eleven targets at up to 90 MB/s without a host computer. It accepts 2.5-inch and 3.5-inch SATA hard drives or solid-state drives directly in its hot-swap slots. A 128 MB buffer and an LCD menu let you start, monitor and verify each operation from the front panel. The unit runs on 115 or 230 V mains power with a 400 W supply.

IT managers and data-centre teams needing fast.

Technicians who must duplicate operating-system images, forensic evidence or bulk deployment payloads across many drives will benefit from the simultaneous copy modes and DoD 5220.22-M compliant erase functions. The duplicator only works with drives that have a native SATA interface, so environments that rely on other drive protocols or form factors cannot use this hardware.

90 MB/s sustained copy throughput

The specified data transfer rate of 5.4 GB per minute (90 MB/s) is the single figure that determines whether the duplicator meets your production window. If your workflow demands higher sustained bandwidth, this model will not satisfy that requirement.

I korthet

  • Copies 11 drives simultaneously with 90 MB/s throughput
  • Standalone operation requires no host computer or software
  • Dual-port hot-swap bays accept 2.5" and 3.5" drives directly
  • DoD 5220.22-M compliant sanitisation erases data securely
  • 128 MB buffer and LCD menu simplify copy and erase tasks

Specifikationer

BrandSystor
ModelSYS1011HS-DP
TypeHard Drive Duplicator
Target1 to 11
Buffer Memory128 MB
Data Transfer Rate5.4GB/min (90MB/sec)
Language SupportEnglish / Spanish / French / Japanese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 400 W
Package Contentssee pictures for details

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How loud does the 40 mm rear fan and per-bay outtake fans get when the duplicator runs all day?

The unit uses a 40 mm rear fan plus a dedicated outtake fan on each of the 11 drive bays to maintain airflow during extended copy or erase sessions.

Which drives can I insert directly without buying extra adapters or caddies?

Both 3.5 inch and 2.5 inch SATA hard drives and solid-state drives fit the hot-swap slots natively, so no adapters are required.

Will the duplicator work with older SATA drives I already own?

Yes, it copies sector-by-sector from any SATA source drive regardless of brand, operating system or format, including legacy partitions and boot sectors.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.