Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black standalone SATA duplicator with eleven hot-swap drive slots and LCD display

Systor

Systor SYS1011HS-DP 1-to-11 SATA Duplicator 90MB/s Dual Port Hot Swap

SKU CH-0739-WSJH6

Duplicates up to 11 SATA drives simultaneously at 90MB/s with hot-swap bays and DoD 5220.22-M sanitisation

  • TypeHard Drive Duplicator
  • Target1 to 11
  • Buffer Memory128 MB
  • Data Transfer Rate5.4GB/min (90MB/sec)
  • Language SupportEnglish / Spanish / French / Japanese
  • DisplayLCD Screen

TARGET SIZE 1 to 11

DATA TRANSFER RATE 5.4GB/min [90MB/sec]

  • Copies 11 drives simultaneously with 90 MB/s throughput
  • Standalone operation requires no host computer or software
  • Dual-port hot-swap bays accept 2.5" and 3.5" drives directly
  • DoD 5220.22-M compliant sanitisation erases data securely
  • 128 MB buffer and LCD menu simplify copy and erase tasks

Standalone 1-to-11 SATA duplicator

The Systor SYS1011HS-DP copies one source drive to eleven targets at up to 90 MB/s without a host computer. It accepts 2.5-inch and 3.5-inch SATA hard drives or solid-state drives directly in its hot-swap slots. A 128 MB buffer and an LCD menu let you start, monitor and verify each operation from the front panel. The unit runs on 115 or 230 V mains power with a 400 W supply.

IT managers and data-centre teams needing fast.

Technicians who must duplicate operating-system images, forensic evidence or bulk deployment payloads across many drives will benefit from the simultaneous copy modes and DoD 5220.22-M compliant erase functions. The duplicator only works with drives that have a native SATA interface, so environments that rely on other drive protocols or form factors cannot use this hardware.

90 MB/s sustained copy throughput

The specified data transfer rate of 5.4 GB per minute (90 MB/s) is the single figure that determines whether the duplicator meets your production window. If your workflow demands higher sustained bandwidth, this model will not satisfy that requirement.

Přednosti

  • Copies 11 drives simultaneously with 90 MB/s throughput
  • Standalone operation requires no host computer or software
  • Dual-port hot-swap bays accept 2.5" and 3.5" drives directly
  • DoD 5220.22-M compliant sanitisation erases data securely
  • 128 MB buffer and LCD menu simplify copy and erase tasks

Specifikace

BrandSystor
ModelSYS1011HS-DP
TypeHard Drive Duplicator
Target1 to 11
Buffer Memory128 MB
Data Transfer Rate5.4GB/min (90MB/sec)
Language SupportEnglish / Spanish / French / Japanese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 400 W
Package Contentssee pictures for details

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How loud does the 40 mm rear fan and per-bay outtake fans get when the duplicator runs all day?

The unit uses a 40 mm rear fan plus a dedicated outtake fan on each of the 11 drive bays to maintain airflow during extended copy or erase sessions.

Which drives can I insert directly without buying extra adapters or caddies?

Both 3.5 inch and 2.5 inch SATA hard drives and solid-state drives fit the hot-swap slots natively, so no adapters are required.

Will the duplicator work with older SATA drives I already own?

Yes, it copies sector-by-sector from any SATA source drive regardless of brand, operating system or format, including legacy partitions and boot sectors.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.