Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Black 2.85 mm filament spool weighing 1 kg

Taulman 3D

Taulman 3D TECH-G Filament 2.85mm 1kg Black

SKU CH-TGHK-MGAYZ

PETG filament for functional parts prints at 235–242 °C on a bed up to 68 °C, 2.85 mm diameter, 1 kg spool, 5900 PSI tensile strength

  • ColorBlack
  • TypeFilament
  • PETG prints easily for functional prototypes
  • 85 mm diameter fits compatible 3D printers
  • 1 kg spool supports extended print runs
  • 5900 PSI tensile strength suits mechanical testing
  • 68 °C bed temperature aids first-layer adhesion

Taulman 3D TECH-G PETG Filament

Taulman 3D TECH-G is a PETG polymer filament designed for functional prototyping and end-use parts. The material offers a tensile strength of 5900 PSI and 3% elongation, providing durability for mechanical testing. It comes in a 1kg spool with a 2.85 mm diameter in black.

Upgrading from standard PLA or basic PETG

Switch to TECH-G when parts must withstand higher mechanical stress or repeated assembly cycles. The increased tensile strength and controlled elongation reduce brittle failure in functional brackets, jigs and enclosures. The print temperature range of 235C to 242C works on most all-metal hotends without specialised hardware.

Build integration and printer requirements

The filament prints on a heated bed up to 68C and adheres well to common surfaces such as PEI or glass with glue stick. The 2.85 mm diameter suits Bowden and direct-drive extruders calibrated for 3 mm class filament. Low warping characteristics free up design freedom for larger flat components without an enclosed chamber.

I korthet

  • PETG prints easily for functional prototypes
  • 85 mm diameter fits compatible 3D printers
  • 1 kg spool supports extended print runs
  • 5900 PSI tensile strength suits mechanical testing
  • 68 °C bed temperature aids first-layer adhesion

Specifikationer

Brandtaulman3d
ColorBlack
TypeFilament

Frågor om den här produkten

What filament diameter does the Taulman TECH-G spool use?

The spool is 2.85 mm diameter filament, so the printer must accept 2.85 mm (often called 3 mm class) material and have a compatible drive gear and Bowden tube or direct-drive path.

What bed temperature should I set for the first layer?

Heat the bed to 68 °C maximum; higher temperatures are not recommended and can cause adhesion issues or warping on this PETG formulation.

When should I dry or replace the filament?

If prints show popping, stringing or layer adhesion loss, dry the spool at low heat for several hours; replace it once the 1 kg roll is consumed or if the material becomes brittle after repeated moisture cycles.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.