Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Compact black SFX power supply with 90mm fan and full modular cables

Thermaltake

Thermaltake Toughpower SFX 1000W 80 Plus Platinum ATX 3.1 PS-STP-1000FNFAPU-1 power supply

SKU CH-AQSR-0RS3G MPN PS-STP-1000FNFAPU-1

SFX form-factor unit delivers 1000 W with full modular cabling and 80 PLUS Platinum efficiency at 115 V input

  • ColorBlack
  • TypeATX 12V 3.1
  • Maximum Power1000 W
  • Fans9cm FDB Fan
  • PFCActive
  • PCI-Express Connector4 x 6+2-Pin

Options SFX 1000W ATX 3.1 Platinum

  • Platinum efficiency cuts waste heat and lowers running cost
  • ATX 12V 3.1 with 600 W 12V-2x6 connector powers modern GPUs directly
  • Full modular cabling keeps the build clean and airflow unobstructed
  • 90 mm fluid-dynamic-bearing fan runs quietly under load
  • Compact 125 mm SFX body fits small-form-factor cases

Thermaltake Toughpower SFX 1000W ATX 3.1

This SFX form-factor power supply delivers 1000 W through a full-modular design. It targets compact-system builders who need high output in a 125 mm chassis. The unit meets 80 Plus Platinum efficiency at 115 V input and supports the ATX 12V 3.1 standard. A native 12V-2x6 connector is included for modern graphics cards.

Build quality and daily connectors

A 9 cm fluid-dynamic-bearing fan provides cooling inside the black enclosure. Full-modular cabling lets you attach only the leads required, reducing clutter in tight cases. Four 6+2-pin PCIe connectors handle multiple GPUs or high-draw add-in cards. Active PFC and a 100-150 ms power-good signal contribute to stable rail delivery. Approvals cover CE, UKCA, FCC and other major safety marks.

Check before ordering

Verify that your case accepts a 125 mm deep SFX supply and that the 9 cm fan orientation matches your airflow path. Confirm the motherboard requires an ATX 12V 3.1 compliant unit with a 12V-2x6 connector. Ensure the four 6+2-pin PCIe leads satisfy every graphics card or accelerator you plan to install. Input range is 100-240 V at 50/60 Hz for worldwide use.

I korthet

  • Platinum efficiency cuts waste heat and lowers running cost
  • ATX 12V 3.1 with 600 W 12V-2x6 connector powers modern GPUs directly
  • Full modular cabling keeps the build clean and airflow unobstructed
  • 90 mm fluid-dynamic-bearing fan runs quietly under load
  • Compact 125 mm SFX body fits small-form-factor cases

Specifikationer

BrandThermaltake
SeriesToughpower SFX
ModelSFX-1000AH8FLP
Part NumberPS-STP-1000FNFAPU-1
ColorBlack
TypeATX 12V 3.1
Maximum Power1000 W
Fans9cm FDB Fan
PFCActive
PCI-Express Connector4 x 6+2-Pin
Max PSU Length125 mm
ModularFull Modular
Power Good Signal100-150 msec
EfficiencyMeet 80 PLUS® Platinum at 115Vac input.
Energy-Efficient80 PLUS PLATINUM Certified
Input Voltage100 - 240 V
Input Frequency Range50/60 Hz
Input Current15A - 8A
MTBF>100,000 Hours
ApprovalsCE/UKCA/FCC/ICES/CB/TUV/cTUVus/LVD/CCC/BSMI/S-MARK/EAC/RCM
Hold-up Time> 17msec at 80% load
Dimensions125mm(W)x63.5mm(H)x103.8mm(D)
Fraktvikt2.09 kg
Paketstorlek254 × 178 × 114 mm

Andra versioner av den här modellen

2 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

What does the ATX 12V 3.1 standard mean for the 12V-2x6 connector on this unit?

The ATX 12V 3.1 design lets the included 12V-2x6 connector deliver up to 600 W to a compatible graphics card, while the full unit is rated for 1000 W total output.

Will the 125 mm length fit my SFX case?

The power supply measures 125 mm long, so it fits standard SFX bays; verify your chassis clearance before ordering.

How do I install the fully modular cables without missing a connection?

Plug only the cables your build needs into the unit’s modular sockets, then route each to the motherboard, GPU and drives; a common mistake is leaving the 12V-2x6 or 4+4-pin CPU connector unseated.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.