Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Coiled brown PLA filament spool, 1.75mm diameter, 10m length, 35g weight

Unique-Bargains

Unique-Bargains PLA Filament 1.75mm 10m Brown 35g

SKU CH-RV7G-2TK2R

A 10 metre spool of 1.75 mm brown PLA filament weighing 35 g, with ±0.03 mm diameter accuracy for consistent printing

  • TypeTubes
  • 75 mm filament fits standard printers with ±0.02 mm accuracy
  • 10 m spool weighing 35 g suits small test prints
  • PLA from renewable sources prints without heated bed
  • Low shrinkage and no warping give clean brown parts
  • High purity material prevents bubbles and nozzle clogging

10 m PLA Filament for 1.75 mm Printers

This 10 metre spool of brown PLA filament is suited to hobbyists and makers who need a small quantity for test prints, calibration or short-run projects. The 35 g net weight keeps waste low when experimenting with new designs or printer settings. It works with any fused-deposition printer that accepts 1.75 mm diameter material.

Dimensional Accuracy and Thermal Limits

The filament is held to a tolerance of +/- 0.02 mm, with a supplier specification of +/- 0.03 mm, reducing the risk of extruder jams and inconsistent layer heights. PLA does not require a heated print bed, so it can be used on entry-level machines without enclosed chambers or high-temperature nozzles. The material softens at relatively low temperatures, limiting its use for parts that must withstand heat or mechanical stress.

Replaces Larger Spools for Occasional Use

This short length replaces a full kilogram spool when storage space is tight or when a project needs only a single colour for a few prints. The jump is worth it if you print infrequently and want to avoid filament absorbing moisture over months of sitting unused. It is not suited for high-volume production runs or for functional parts that demand the higher temperature resistance of ABS, PETG or other engineering-grade polymers.

I korthet

  • 75 mm filament fits standard printers with ±0.02 mm accuracy
  • 10 m spool weighing 35 g suits small test prints
  • PLA from renewable sources prints without heated bed
  • Low shrinkage and no warping give clean brown parts
  • High purity material prevents bubbles and nozzle clogging

Specifikationer

BrandUnique Bargains
TypeTubes

Frågor om den här produkten

Should I pick the 10 m spool or a longer one for a small test print?

The 10 m length and 35 g net weight are sized for quick trials or calibration prints; a larger spool only makes sense if you plan multiple full-size models.

What does the ±0.02 mm accuracy mean once the filament is in my printer?

It keeps the 1.75 mm diameter within a tight band so the extruder feeds evenly, reducing jams and giving smoother layers on the finished part.

Will the 1.75 mm diameter work with my printer’s Bowden or direct-drive extruder?

Yes — the filament is made to the standard 1.75 mm size used by most desktop FDM printers, so it fits both Bowden tubes and direct-drive gears without modification.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.