نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Coiled brown PLA filament spool, 1.75mm diameter, 10m length, 35g weight

Unique-Bargains

Unique-Bargains PLA Filament 1.75mm 10m Brown 35g

SKU CH-RV7G-2TK2R

A 10 metre spool of 1.75 mm brown PLA filament weighing 35 g, with ±0.03 mm diameter accuracy for consistent printing

  • TypeTubes
  • 75 mm filament fits standard printers with ±0.02 mm accuracy
  • 10 m spool weighing 35 g suits small test prints
  • PLA from renewable sources prints without heated bed
  • Low shrinkage and no warping give clean brown parts
  • High purity material prevents bubbles and nozzle clogging

10 m PLA Filament for 1.75 mm Printers

This 10 metre spool of brown PLA filament is suited to hobbyists and makers who need a small quantity for test prints, calibration or short-run projects. The 35 g net weight keeps waste low when experimenting with new designs or printer settings. It works with any fused-deposition printer that accepts 1.75 mm diameter material.

Dimensional Accuracy and Thermal Limits

The filament is held to a tolerance of +/- 0.02 mm, with a supplier specification of +/- 0.03 mm, reducing the risk of extruder jams and inconsistent layer heights. PLA does not require a heated print bed, so it can be used on entry-level machines without enclosed chambers or high-temperature nozzles. The material softens at relatively low temperatures, limiting its use for parts that must withstand heat or mechanical stress.

Replaces Larger Spools for Occasional Use

This short length replaces a full kilogram spool when storage space is tight or when a project needs only a single colour for a few prints. The jump is worth it if you print infrequently and want to avoid filament absorbing moisture over months of sitting unused. It is not suited for high-volume production runs or for functional parts that demand the higher temperature resistance of ABS, PETG or other engineering-grade polymers.

أبرز المميزات

  • 75 mm filament fits standard printers with ±0.02 mm accuracy
  • 10 m spool weighing 35 g suits small test prints
  • PLA from renewable sources prints without heated bed
  • Low shrinkage and no warping give clean brown parts
  • High purity material prevents bubbles and nozzle clogging

المواصفات

BrandUnique Bargains
TypeTubes

أسئلة حول هذا المنتج

Should I pick the 10 m spool or a longer one for a small test print?

The 10 m length and 35 g net weight are sized for quick trials or calibration prints; a larger spool only makes sense if you plan multiple full-size models.

What does the ±0.02 mm accuracy mean once the filament is in my printer?

It keeps the 1.75 mm diameter within a tight band so the extruder feeds evenly, reducing jams and giving smoother layers on the finished part.

Will the 1.75 mm diameter work with my printer’s Bowden or direct-drive extruder?

Yes — the filament is made to the standard 1.75 mm size used by most desktop FDM printers, so it fits both Bowden tubes and direct-drive gears without modification.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.