Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Vszerda HXT-51X PCIe 1-to-4 riser board with 60cm USB 3.0 cable and SATA power cables

Vszerda

Vszerda HXT-51X PCI-E 1 to 4 Riser Card with USB 3.0 Cable 60cm

SKU CH-M4VE-R1V0G

Expands one PCIe x1 slot into four x16 slots using a 60 cm USB 3.0 cable and includes SATA power adapters for mining rigs

  • Expands one PCIe x1 slot into four x16 slots using USB 3.0 cable
  • 60 cm USB 3.0 cable gives flexible placement for mining rigs
  • No driver installation required for immediate device recognition
  • 4-pin power input with IC management delivers stable supply to all slots
  • Includes two SATA 15-pin to 4-pin cables for auxiliary power connections

PCIe 1-to-4 port multiplier

The Vszerda HXT-51X converts a single PCIe x1 slot into four PCIe x16 physical connectors using a USB 3.0 link. It targets mining rigs or test benches that need multiple GPUs or accelerators from one motherboard lane. No drivers are required for basic enumeration. The board draws auxiliary power from a 4-pin connector and includes two SATA 15-pin to 4-pin adapters for peripheral supply.

Thermals noise and power

The riser uses an onboard IC power management device to regulate delivery across the four slots. External power enters through the 4-pin header and the bundled SATA adapters, keeping the motherboard slot within its rated current. The 60 cm USB 3.0 cable allows the expansion board to sit in open air, so GPU coolers exhaust freely without recirculating heat inside a cramped chassis. No active cooling is present on the riser itself.

Build quality and daily use

The package supplies the x16 backplane, the x1 riser card, the 60 cm USB 3.0 cable and two SATA power cables. Connectors are keyed, but the supplier warns that misaligned insertion can damage pins, so the socket should be held during plug-in. The system must be powered off before any card is added or removed. The CE marking confirms the unit meets basic European safety requirements.

I korthet

  • Expands one PCIe x1 slot into four x16 slots using USB 3.0 cable
  • 60 cm USB 3.0 cable gives flexible placement for mining rigs
  • No driver installation required for immediate device recognition
  • 4-pin power input with IC management delivers stable supply to all slots
  • Includes two SATA 15-pin to 4-pin cables for auxiliary power connections

Specifikationer

Inga publicerade specifikationer för den här produkten än.

Frågor om den här produkten

How do I install the Vszerda HXT-51X riser card into a PCIe x1 slot and what step do people often miss?

Power off the system, insert the 1X riser into the motherboard PCIe x1 slot, connect the 60cm USB 3.0 cable to the 16X board, attach the two SATA 15Pin-4Pin power cables to the board, then plug in your PCIe devices; the step often missed is connecting both SATA power cables before powering on.

What maintenance or replacement will the Vszerda HXT-51X need over time?

The USB 3.0 cable and the two SATA 15Pin-4Pin power cables are the only wear items; inspect them periodically for connector fatigue or cable damage and replace if contacts become loose or insulation cracks.

What limit appears first when running four devices continuously on the Vszerda HXT-51X?

The single PCIe x1 host link caps total bandwidth at one lane, so sustained throughput across all four slots is limited by that upstream bottleneck rather than the riser board itself.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.