BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.
YINGHUA
Dual-socket X99 server board with two E5-2620 V3 CPUs, eight DDR4 ECC slots up to 32 GB each, six SATA 3.0 ports and one M.2 slot
This motherboard ships with a pair of Intel E5-2620 V3 CPUs already installed in dual LGA 2011 sockets on the Intel X99 chipset. It targets builders assembling a multi-processor server or workstation that can use up to eight DDR4 ECC modules at 2133, 2400 or 2800 speeds. The board provides six SATA 3.0 ports, one M.2 slot for PCIe-only drives and a second M.2 slot that accepts both PCIe and SATA devices.
The E5-2620 V3 processors are pre-mounted, so the main steps are seating DDR4 ECC memory in the eight slots, connecting the 100M Realtek 8106E or 8111H network port and wiring the six SATA 3.0 drives. Builders often forget that the first M.2 slot accepts PCIe drives only, while the second supports both PCIe and SATA; using the wrong drive type in the first slot will prevent detection. The board measures 290 by 280 millimetres and uses a standard black PCB layout.
Verify that your chassis can accommodate a 290 by 280 millimetre E-ATX form factor and that the power supply delivers the dual 8-pin or 4+4-pin CPU connectors required by the X99 platform. Confirm that any M.2 storage you plan to use matches the slot specifications: PCIe-only for the first slot and PCIe or SATA for the second. Ensure your operating system supports the integrated Realtek 100M network controller and the onboard three-in-one audio interface.
| CPU Type | Intel Atom |
|---|
Enter the BIOS on first boot and verify that two CPUs are detected with the correct model name and core counts shown on the main screen.
The package includes the X99 dual-socket motherboard and two E5-2620 V3 CPUs; you must add DDR4 ECC memory modules, storage drives, a power supply and a chassis.
The board supports DDR4 at 2133, 2400 and 2800 MT/s; pick modules rated for 2400 or 2800 MT/s to match the highest supported frequencies.
Även i den här avdelningen
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
Det du betalar med, och det du ser priserna i.
Skickas från din plånbok i kassan
Endast visning — katalogen är prissatt i US-dollar
Ingen valuta matchar.
Välj det språk du vill att webbplatsen ska visas på.
Inga språk matchar.
Ny här?
Har du redan ett konto?
Det finns ingen automatisk återställning: den här butiken skickar inga e-postmeddelanden, så det finns ingen engångslänk att begära. Lämna adressen kopplad till kontot, så hanteras den för hand.
Förfrågan noterad
Inget är på väg till din inkorg — den här butiken skickar aldrig e-post. Någon tar hand om detta manuellt.
Kom du på det?