A-Tech
A-Tech 16GB DDR4 2133MHz CL15 2Rx8 desktop RAM
A 16GB DDR4 2133MHz CL15 desktop DIMM tested for HP systems using major-brand chips
- Capacity16GB
- SpeedDDR4 2133 (PC4 17000)
- Tested Frequency2133
- CAS LatencyCL15
- Voltage1.20V
- ECCNo
- 16 GB capacity lets you run heavier workloads
- DDR4 2133 MHz speed matches PC4-17000 system requirements
- CL15 latency and 1.20 V voltage keep timing tight and power low
- 288-pin unbuffered DIMM fits standard desktop slots
- Tested with major-brand chips for reliable operation
16GB DDR4 2133MHz module
This 16GB DDR4 2133MHz module is a single 288-pin DIMM rated at CL15 and 1.20V. It is built for desktop systems that accept unbuffered non-ECC memory. The stick uses major-brand chips and is tested at 2133 MT/s to deliver dependable capacity for everyday workloads.
HP part-number cross-reference
The module replaces HP part numbers 797347-591, 798035-001, 834933-001, 840819-001, T0E52AA, T0E52AT, Y3X96AA and Y3X96AT. Matching these references lets you confirm compatibility before purchase without guessing supported configurations.
288-pin unbuffered DIMM build
The standard 288-pin DDR4 DIMM fits regular desktop slots and operates at the JEDEC 1.20V level. Unbuffered construction keeps the signal path direct, while the single-rank 2Rx8 organisation works with typical consumer motherboards that support 16GB per slot.
จุดเด่น
- 16 GB capacity lets you run heavier workloads
- DDR4 2133 MHz speed matches PC4-17000 system requirements
- CL15 latency and 1.20 V voltage keep timing tight and power low
- 288-pin unbuffered DIMM fits standard desktop slots
- Tested with major-brand chips for reliable operation
ข้อมูลจำเพาะ
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 2133 (PC4 17000) |
| Tested Frequency | 2133 |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
คำถามเกี่ยวกับสินค้านี้
Will the 1.20V DDR4 module need any voltage adjustment or replacement as it ages?
The module runs at the standard 1.20V DDR4 voltage and is unbuffered non-ECC; no voltage adjustment is required and the chips are tested for long-term reliability.
What limit appears first when the 16GB stick runs at 2133MHz CL15 for hours?
The CAS latency of CL15 at 2133MHz sets the timing boundary; sustained throughput is capped by that rated speed and latency.
How much heat or noise does the 288-pin DIMM produce during all-day use?
As a passive 1.20V DDR4 DIMM with no fan or moving parts, it generates minimal heat and zero audible noise under continuous load.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



