A-Tech
A-Tech 16GB DDR4 2400 CL17 1.2V 260-Pin SODIMM laptop RAM
16 GB DDR4 2400 CL17 SO-DIMM laptop memory upgrade with major-brand chips and 1.2 V operation
- Capacity16GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Voltage1.20V
- ECCNo
- Boosts multitasking with 16 GB DDR4 capacity
- Runs at 2400 MHz PC4-19200 speed
- Low 1.20 V voltage cuts power draw
- CL17 latency sharpens response times
- 260-pin SODIMM fits standard laptop slots
What this is
A-Tech 16GB DDR4 2400 CL17 260-Pin SODIMM laptop RAM is a 16 GB unbuffered non-ECC memory module built with major-brand chips and rated at 1.20 V. It matches the PC4-19200 specification and is sold as a direct replacement for the listed Crucial part numbers.
Who this suits
This module suits owners of laptops, notebooks or all-in-one systems that accept 260-Pin DDR4 SO-DIMMs at 2400 MHz and do not require ECC or registered memory. Buyers who need ECC error correction, registered buffering, a different pin count, or a speed other than 2400 MHz should look elsewhere.
Deciding specification
The 260-Pin DDR4 SO-DIMM form factor combined with 2400 MHz speed and CL17 latency determines whether this module fits and runs in a given system. Always verify the supported memory specifications of the target machine before ordering.
จุดเด่น
- Boosts multitasking with 16 GB DDR4 capacity
- Runs at 2400 MHz PC4-19200 speed
- Low 1.20 V voltage cuts power draw
- CL17 latency sharpens response times
- 260-pin SODIMM fits standard laptop slots
ข้อมูลจำเพาะ
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
คำถามเกี่ยวกับสินค้านี้
My laptop has a 260-pin DDR4 SO-DIMM slot — will this module fit?
Yes, this is a 260-pin DDR4 SO-DIMM built to the standard laptop form factor, so it installs directly into any compatible DDR4 SO-DIMM slot.
What happens if I pair this CL17 2400 MHz stick with a slower DDR4 module already in my system?
The memory controller will run both modules at the lowest common speed and latency, so the faster stick simply down-clocks to match the slower one.
How can I confirm the module is recognised at its rated 2400 MHz and CL17 after installation?
Open Task Manager's Performance tab or run CPU-Z; both will show the current DRAM frequency and CAS latency for each installed module.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



