A-Tech
A-Tech 16GB DDR4 3200 ECC UDIMM 1Rx8 Server RAM
16 GB DDR4 3200 ECC UDIMM with CL22 latency and 1.2 V operation for server workloads
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- CAS LatencyCL22
- Voltage1.20V
- ECCYes
- Buffered/RegisteredUnbuffered
- 16 GB capacity expands server memory for heavier workloads
- DDR4 3200 MHz speed accelerates data transfer rates
- ECC unbuffered design detects and corrects memory errors
- 2 V operation matches standard DDR4 voltage requirements
- 288-pin DIMM form factor fits compatible server slots
Capacity and purpose
This 16GB DDR4 ECC UDIMM module runs at 3200MHz with CL22 latency and 1.20V operation. It is built as a compatible replacement for Micron MTA9ASF2G72AZ-3G2B1 and MTA9ASF2G72AZ-3G2F1 parts in server and workstation systems.
Who this fits
The module suits administrators upgrading or repairing platforms that accept unbuffered DDR4 ECC memory in a 288-pin DIMM form factor. Builders who need registered or load-reduced DIMMs, or systems limited to lower DDR4 speeds, should look at something else.
Deciding specification
The critical detail is the unbuffered ECC design with a single-rank 1Rx8 organisation on Micron chipset. Verify that your motherboard and CPU support unbuffered ECC UDIMMs before ordering.
จุดเด่น
- 16 GB capacity expands server memory for heavier workloads
- DDR4 3200 MHz speed accelerates data transfer rates
- ECC unbuffered design detects and corrects memory errors
- 2 V operation matches standard DDR4 voltage requirements
- 288-pin DIMM form factor fits compatible server slots
ข้อมูลจำเพาะ
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Micron |
| Model | MTA9ASF2G72AZ-3G2B1, MTA9ASF2G72AZ-3G2F1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Micron Chipset |
| Features | MTA9ASF2G72AZ-3G2B1, MTA9ASF2G72AZ-3G2F1 |
คำถามเกี่ยวกับสินค้านี้
What DDR4 standard and peak transfer rate does the PC4-25600 rating on this 16GB ECC UDIMM represent?
PC4-25600 denotes DDR4 3200 with a 25600 MB/s peak transfer rate on the 288-pin interface.
Which physical slot and pin count does this 1Rx8 16GB module require on the motherboard?
It fits a standard DDR4 UDIMM slot with 288 pins; the spec also lists a 262-pin form factor reference for the module itself.
What BIOS setting or installation step is commonly missed when adding this ECC unbuffered stick to a server board?
Enable ECC in the BIOS after seating the module firmly until the retention clips click; the board will not use error correction otherwise.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



